Search found 79 matches

by Sorcerio
Wed Dec 15, 2010 6:36 am
Forum: HELP!
Topic: No CV/Gate from Kenton Pro 2000mkii Aux ports
Replies: 6
Views: 834

Re: No CV/Gate from Kenton Pro 2000mkii Aux ports

Checking with a multimeter sounds like a good idea. I'm not sure if these aux outputs are sending anything... :(
by Sorcerio
Tue Dec 14, 2010 2:42 am
Forum: HELP!
Topic: No CV/Gate from Kenton Pro 2000mkii Aux ports
Replies: 6
Views: 834

No CV/Gate from Kenton Pro 2000mkii Aux ports

Is there any reason why my Kenton Pro 2000 mkii aux channels are not putting signals out to my cv/gate synth? It used to work with no problem. All the ports 1-6 seem unresponsive. I'm trying to control a Sequential Pro One on midi channel 5. Aux 1 - Receive channel = 5 ------V/Oct from notes ------F...
by Sorcerio
Mon Dec 13, 2010 4:21 pm
Forum: HELP!
Topic: Vibrating Pro One
Replies: 23
Views: 933

Re: Vibrating Pro One

Thanks all! Yeah I realized I should have stuck this in the help section, but the synth is functioning beautifully so I was asking more as a curiosity. If this is the transformer, is it an indication of it going bad? Shouldn't be too hard to swap out for a new one, that is if I can even find the rig...
by Sorcerio
Sat Dec 11, 2010 1:18 am
Forum: HELP!
Topic: Vibrating Pro One
Replies: 23
Views: 933

Re: Vibrating Pro One

It is plugged in to the same as the rest of all my other (non-vibrating) gear. The ground pin on the power cord is fully intact.

It's just an all over vibration. I haven't felt for a source, but I will when I get back to it. There are no modifications as far as I can tell. I think she is stock.
by Sorcerio
Fri Dec 10, 2010 9:19 pm
Forum: HELP!
Topic: Vibrating Pro One
Replies: 23
Views: 933

Vibrating Pro One

I have a Sequential Circuits Pro One. When it's powered on I feel a very light constant vibration. Is this normal?

I know it sounds funny, but it's true.
by Sorcerio
Wed Nov 17, 2010 11:39 pm
Forum: HELP!
Topic: Arp Odyssey note/key error
Replies: 3
Views: 484

Re: Arp Odyssey note/key error

Good to know about the 15V. Thank you for that. I would love to take it in for a reconditioning/overhaul/repairs, but I'm really strapped for cash at the moment and I need to get some recording done. Hmm I don't remember it being this way a few years ago when I used to sequence it with an Atari and ...
by Sorcerio
Wed Nov 17, 2010 2:58 am
Forum: HELP!
Topic: Arp Odyssey note/key error
Replies: 3
Views: 484

Arp Odyssey note/key error

Hello VSEers! Long time no see! I have a (hopefully minor) problem with my Odyssey Mk2 2810. There is something keeping it from staying on the proper scale D#3 and lower in the Logic piano roll. D#3 and D3 both play D#3 and then the scale picks back up as normal all the rest of the way down. Normal ...
by Sorcerio
Sun Apr 13, 2008 10:32 am
Forum: Samplers
Topic: Akai S-950- first sampler? or ASR-10?
Replies: 16
Views: 2073

Same here about recording to a computer unless you count using an Atari to sequence with. The S-950 is great as a drum bank. Very nice with its native multiple outputs and convenient HD floppy drive. And to concur, it is pretty easy to use, just can be a bit tedious when setting up kits and editing ...
by Sorcerio
Sun Apr 13, 2008 10:17 am
Forum: General Synthesizers
Topic: Can somebody please explain?
Replies: 2
Views: 295

Can somebody please explain?

How does the keyboard technology work in my Arp Odyssey? I noticed that it has a long rod that spans the length of the keyboard and each key has its own tine that makes contact with the rod. Is there a resistor on each key resisting electricity in different amounts to get each note or something? I d...
by Sorcerio
Tue Feb 19, 2008 9:50 am
Forum: General Synthesizers
Topic: Roland MKS-80
Replies: 34
Views: 2227

Roland MKS-80

Damn! I can't believe this synth sells for so much money!!! The samples here on VSE sound worse than me taking a c**p on top of an AMC Gremlin.
by Sorcerio
Sun Feb 17, 2008 5:45 pm
Forum: HELP!
Topic: Pulling ROM chips
Replies: 4
Views: 206

Thanks! Never knew these existed.
by Sorcerio
Sun Feb 17, 2008 1:45 pm
Forum: HELP!
Topic: Pulling ROM chips
Replies: 4
Views: 206

Pulling ROM chips

I am wondering if there is a way to pull out ROM chips without damaging (bending) the pins of the old ones you are pulling out. When I upgraded my OS ROMs in my Atari 1040ST I had to pull (pried from underneath at first) them up and out a little on each side, alternating sides until it was ready to ...
by Sorcerio
Sun Feb 17, 2008 1:36 pm
Forum: General Synthesizers
Topic: Customer experiences with Sequential Wine Country
Replies: 8
Views: 5472

Customer experiences with Sequential Wine Country

Please let me know what your experiences are with Sequential Wine Country. Their site seems a little rag-tag. I need to order new OS chips for my P600 and Drumtraks. Do they send stuff out quickly? Ever ran into problems of them not having things in stock that are "available" on their site?

Thanks.
by Sorcerio
Sun Feb 17, 2008 1:26 pm
Forum: General Synthesizers
Topic: Quick questions about Little Phatty
Replies: 28
Views: 2244

For those considering getting an LP, I thought I would pass along that Moog is offering a $75 rebate through the end of February.
by Sorcerio
Sat Feb 09, 2008 7:59 pm
Forum: The Listening Lounge
Topic: Prophet~600
Replies: 4
Views: 387

Thanks. I think the 600 has a really nice organic sound overall. I might add some more later to show its scary side as well.