Hi

I have Roland SVC350 Vocoder and hearing weird low frequency hum (sounds like harmonics sounds)
check the sounds below please

https://www.dropbox.com/s/4wxktfxaqkuwf ... 0.mp3?dl=0

Does anyone have an idea what this noise is about?

Thanks

I have this Roland JX3p and I hear weird cracking noise when I turn on the Chorus and it's way less but I still hear when I turn off the chorus I've recently replaced the Chorus chip cause of loud chorus noise and it's totally different type of noise. please check the link below and let me know if a...

Hi I have this Ensoniq DP4 and couldn't get the sound from output 4 I've done factory reset and Sine wave test procedure but still couldn't get the sound from output 4. is there any specific stuffs that I need to make output 4 work? For instance, I've plugged only output4 (not 3&4) if anyone have id...

Hi found that jack socket for output3 has broken on my DP4 (not plus)

this one is actually thicker than other sockets and I couldn't find it from anywhere.

Does anyone know what's the model no. or what kind if socket should I buy for this?

Thanks

Hi. I recently bought second hand ensoniq dp4. so I was checking after I receiving it and found that output 4 doesn't work. I set to 4 mono out and tried both ts and trs cable for output 4 but didn't really work. also I checked with Preset Sine/Noise Gen and I could hear sound from all outputs excep...

Hi So I'm recording on my yamaha mt4x mtr but certain channel is too low when I record it's bit complicated so here's how 1) I'm recording on Track 1 so I plugged my gear to same channel and assigned it to Track 1 2) Monitor level seems okay but it's too low when I record 3) So I assigned it to Trac...

Hi

I'm trying to use external zip drive for my mpc 2000xl and couldn't find exact cable for this since I've never used scsci before.

so I found that its DB25/HD50 cable but there were 2 type and 3 type makes me confusing.

what type of cable should I use? both 2 type and 3 type are fine?

Thanks.

Hi I'm using MPC 1000 (JJOS 3.16) and using MPC as a sequencer for Yamaha TG33 Module. It didn't have any problem when I sequenced other gears (wasn't Multitimbral) but I found that there's a little bit of delay in between Last beat and First beat of the sequence when I send midi to TG33 At first, I...

Thank you all!

It wasn't the matter of dbx, It just worked by setting the monitor bus to stereo but I still didn't get how this machine works.

gotta read the manual letter by letter from the begining

thank you guys anyway have a nice day!

Hi guys! I have this yamaha mt4x newly added on my set up and I have a problem with playback level of it. When I play the tape that I recorded with mt4x, compared to other published music tapes their level is fine. but when I play it on the tape deck or whatever player, I could barely hear the stuff...