Search found 4 matches

by CantStandDecorating
Sun Jul 12, 2020 9:52 am
Forum: HELP!
Topic: EMU ESI-32 won't work with SCSI2SD
Replies: 5
Views: 1006

Re: EMU ESI-32 won't work with SCSI2SD

It wouldn't allow me to attach the file, so here is the text: <SCSI2SD> <BoardConfig> <!-- ******************************************************** Enable the onboard active terminator (v5.1 or greater). Both ends of the SCSI chain should be terminated. Disable only if the SCSI2SD is in the middle o...
by CantStandDecorating
Sat Jul 11, 2020 11:02 pm
Forum: HELP!
Topic: EMU ESI-32 won't work with SCSI2SD
Replies: 5
Views: 1006

Re: EMU ESI-32 won't work with SCSI2SD

If the resistor packs are the RN1 RN2 and RN3 things then they are in place.
by CantStandDecorating
Sat Jul 11, 2020 10:44 pm
Forum: HELP!
Topic: EMU ESI-32 won't work with SCSI2SD
Replies: 5
Views: 1006

Re: EMU ESI-32 won't work with SCSI2SD

The manual states: The ESI-32 is shipped with termination power On with the termination resistors left in place. This assumes that the ESI-32 will be placed at one end of the SCSI chain. The ESI-32 has an automatic system which ONLY supplies terminator power when it is NOT being supplied by another ...
by CantStandDecorating
Sat Jul 11, 2020 9:16 pm
Forum: HELP!
Topic: EMU ESI-32 won't work with SCSI2SD
Replies: 5
Views: 1006

EMU ESI-32 won't work with SCSI2SD

I decided to bring my EMU ESI-32 back to life, so I ordered and fitted a new screen and also a SCSI2SD drive. The SCSI2SD is internal and connected to the sampler via a 15cm, 50 pin SCSI ribbon cable. I connected the SCSI2SD v5.1 to my computer and updated to the latest firmware (4.8.04). I have fla...