Search found 114 matches

by hollandturbine
Sat Feb 16, 2008 3:16 pm
Forum: HELP!
Topic: KAWAI K4 EDITING BASICS FOR NEW SYNTH USER PLEASE!!!
Replies: 14
Views: 5963

This site has some good software editors for it.

http://www.geocities.com/mnx_kawai/
by hollandturbine
Tue Jan 15, 2008 11:09 am
Forum: HELP!
Topic: sequencer question
Replies: 17
Views: 2557

That human clock sounds cool, I think Redsound made something that was similar.
by hollandturbine
Mon Jan 14, 2008 12:41 pm
Forum: HELP!
Topic: sequencer question
Replies: 17
Views: 2557

The problem is that tap tempo works by dividing four even beats, so triggering from a kick drum is going to give you problems. Any sequencer that is triggered from the drum kit, will have to be programed around the drum pattern, each pulse will move the sequence one step with rests also programed in...
by hollandturbine
Mon Jan 14, 2008 10:54 am
Forum: General Synthesizers
Topic: Opinions on the Roland SH-2
Replies: 7
Views: 1448

My first synth was the SH-2 and I still use it, bass is its main clam to fame, it can do a lot, from big boomy 808 kick drum style sine waves, to supper thick bass lines and great leads, you can detune the oscillators, run stuff through the filter, it just kicks a*s.
by hollandturbine
Sun Jan 13, 2008 1:02 pm
Forum: Sound Production
Topic: Recording Drum Machines?
Replies: 22
Views: 4691

Individual is best for adding effects or processing of the individual drum sounds, I usually arm multiple tracks. I sometimes record just the stereo mix of a sub mixer if I am using outboard effects and processors on the outs before the mixer, but only if I can make changes if I have to later. I hav...
by hollandturbine
Tue Jan 08, 2008 7:03 am
Forum: HELP!
Topic: does anyone know......
Replies: 4
Views: 683

Re: does anyone know......

the size of the plug(tip) on the standard boss adapter? Looking at my Boss SYB-5 the plug on the back of that is centre (-) and although I have a plug in my hand that fits, I can't find my vernier so I am using a steel ruler, 5mm OD and 2mm ID is what I get off the plug, the plug is not from the Bo...
by hollandturbine
Tue Jan 08, 2008 6:38 am
Forum: General Synthesizers
Topic: Behringer BCR2000 question
Replies: 25
Views: 6654

What I have done is use some Cubase device panels to program the BCR2000 using the learn function on it, (there must be some way to dump more complex sysex data straight to it though) and this got me to thinking about other editors for synths too, instead of sending the data from the editor to the s...
by hollandturbine
Tue Jan 08, 2008 5:23 am
Forum: General Synthesizers
Topic: Playing left handed
Replies: 19
Views: 2866

If you make your own little box, you might want to add a bypass contact switch for the neutral position or add a trim pot for tuning, a lot of people forget that they are tuning a synth that has a wheel with a large spring on it.
by hollandturbine
Tue Jan 08, 2008 4:45 am
Forum: HELP!
Topic: Anyone know of better knobs for a TB-303
Replies: 7
Views: 1326

Keep in mind that replacing the knob with a smaller diameter one may result in unwanted sideways movement of the shaft and damage the tracks one the pot.
by hollandturbine
Tue Jan 08, 2008 4:18 am
Forum: Samplers
Topic: How do you emulate the sp1200 sound?
Replies: 17
Views: 14990

Hageir is right, you want to reduce the bit depth and sample rate.
A bitcrusher will do a nice job.
by hollandturbine
Tue Jan 08, 2008 3:51 am
Forum: Sound Production
Topic: For those of you with more than 4 synths...Studio Setup?
Replies: 37
Views: 6298

When describing my setup using my patch bay, I just kind of gave the most common way I use it, but the patch bay gives me so many different combinations. I tend to use input 1&2 of my audio interface for recording my synths one at a time and the other ins and outs I use for routing to external effec...
by hollandturbine
Mon Jan 07, 2008 1:46 pm
Forum: Sound Production
Topic: For those of you with more than 4 synths...Studio Setup?
Replies: 37
Views: 6298

Synths--->Patch bay--->Sub mixer--->Patch bay--->Sound card in 1&2
by hollandturbine
Thu Jan 03, 2008 4:15 am
Forum: General Synthesizers
Topic: RM1x
Replies: 24
Views: 3815

The RM1X is a really good sequencer, once you learn to use it you will start to discover that there are a few different ways to edit a lot of parameters, for example you can scroll through numbers or use the numbered key pad for entry. The only real complaint I have is that in grid record mode you c...
by hollandturbine
Thu Jan 03, 2008 3:21 am
Forum: General Synthesizers
Topic: Roland JV-1080
Replies: 29
Views: 4449

I do use the free changeit editor for my JV-1080 from time to time.
The cards I have are the Vintage Synthersizer, World, Pop, and Super sound set, I also have the Sounds of Asia card (but that last one lives in my JV-80)
by hollandturbine
Wed Jan 02, 2008 6:15 pm
Forum: Sound Production
Topic: Anyone use a Behringer BCR2000?
Replies: 9
Views: 2164

Had mine for a few years now, it is a great controller, what I worked out was that I could use the Cubase device panel editor to program it using the learn function of the BCR2000, so with the device panel I made for the V-Verb pro I set the panel to output MIDI to the BCR2000 used the learn functio...