Anybody has an Access Virus B ?

Discussions about anything analog, digital, MIDI, synth technology, techniques, theories and more.
Post Reply
vickno
Newbie
Newbie
Posts: 1
Joined: Wed Jul 26, 2017 10:06 pm

Anybody has an Access Virus B ?

Post by vickno » Wed Jul 26, 2017 10:09 pm

How to create a multi patch from 2 single-mode patches ? In other words I want the sound from patch C45 on the left side of the keyboard and the patch E02 on the right side, how to do this ? Thanks !

garysome1
Newbie
Newbie
Posts: 1
Joined: Thu Jun 27, 2019 3:32 am

Re: Anybody has an Access Virus B ?

Post by garysome1 » Thu Jun 27, 2019 3:53 am

Better late than never?

** Get in the right mode **
Press the MULTI button
Press the CTRL button
Now use the PART -/+ buttons to select from the 16 Singles in the Multi

** Disable parts 3 through 16 **
Press the PART buttons to get to Part 3
Press the PARAMETER left "<" button vigorously, the leftmost parameter is "PartEnable", set to Off
Repeat the previous steps for parts 4 through 16

** Select the 2 Singles **
Press the PART buttons to get to Part 1
Press the PARAMETER left "<" button vigorously, the leftmost parameter is "PartEnable", set to On
Press the PARAMETER right ">" button, choose bank C
Press the PARAMETER right ">" button, choose 45
Press the PARAMETER right ">" button 4 times for the "LowKey" parameter, set to C-2
Press the PARAMETER right ">" button "HighKey" parameter, set to C3
Press the PART buttons to get to Part 2
Press the PARAMETER left "<" button vigorously, the leftmost parameter is "PartEnable", set to On
Press the PARAMETER right ">" button, choose bank E
Press the PARAMETER right ">" button, choose 02
Press the PARAMETER right ">" button 4 times for the "LowKey" parameter, set to C#3
Press the PARAMETER right ">" button "HighKey" parameter, set to G8


From here you'll probably want to tweak a few things, the MULTI "administrative" parameters are under the CTRL and EDIT buttons.

Post Reply