Analogue Polyphonic Synth Recommendations

Discussions about anything analog, digital, MIDI, synth technology, techniques, theories and more.

Analogue Polyphonic Synth Recommendations

Postby Gilmour928 » Tue May 29, 2018 9:39 pm

Hi,
I'm looking at buying an analogue polyphonic synth and I have a budget of around £1300. So far I am considering the Dave Smith Prophet Rev 2 and the korg prologue. I preferred the Prophets features/layout (even though they're pretty similar) but it lacked the bass the Korg had.
I have considered vintage synths but I'm concerned with reliability, but I am open to any suggestions.
Gilmour928
Newbie
Newbie
 
Posts: 3
Joined: Thu Apr 12, 2018 5:28 pm

Re: Analogue Polyphonic Synth Recommendations

Postby minime123 » Fri Jun 01, 2018 1:10 pm

i find its usually better to focus on overall tone than features. if the prophet is lacking in bass frequencies and you need them, the prologue sounds like a better choice for you, despite the fact that there may be fewer options.
as for vintage, we meticulously service the items we sell here and it results in instruments that are generally much more reliable than others on the market (and are priced accordingly), but we may have a few things within your budget - please shoot us an email through our website if we can help.
mini
VINTAGE SYNTH DEALER
- We Buy Sell Trade Repair Vintage Synths
- We Buy Broken Gear & Parts Too...
- Huge Selection, Dependable Service
- https://tonetweakers.com
User avatar
minime123
Expert Member
Expert Member
 
Posts: 1063
Joined: Wed Jul 20, 2005 1:44 pm
Location: USA

Re: Analogue Polyphonic Synth Recommendations

Postby clubbedtodeath » Mon Jun 04, 2018 2:57 pm

I'm going to partly disagree with my learned colleague here. :D

It's absolutely true that you have to get the overall tone of the instrument. Without that, you'll never gel with it. But, the features are important too, as they dictate what sounds you can squeeze out of it.

I have a DSI Rev2. It's absolutely one of the best synths I've ever got my hands on. The interface is easy to use, with almost a button for everything, and with a well-thought-out menu system that is only 1 level deep. Where it beats many other synths, is the number of modulation options. The basic modulation matrix is 8 x 53 (8 sources, 53 destinations), so that means you can route stuff like aftertouch, velocity, pitch etc. to pretty much any parameter you can tweak with a knob. In addition, you have 4 LFOs, a step/gate sequencer, and an auxiliary envelope which can also modulate stuff.

Is it a bass synth? In my experience, no. It can do them well enough, but you may be better off using a suitable monosynth. That's not to say it doesn't have bass presence - it certainly does. I've got brass pads that'll flap trousers ankles.

If this is your first synth, I'd suggest looking at what bases you want that synth to cover. For £1300, you might be able to get two synths - one for pads/arps/leads, and one for bass. Just food for thought.

Cheers
User avatar
clubbedtodeath
Expert Member
Expert Member
 
Posts: 1007
Joined: Fri Apr 10, 2009 12:12 am
Location: Older Scotia

Re: Analogue Polyphonic Synth Recommendations

Postby knolan » Tue Jun 12, 2018 11:45 am

clubbedtodeath wrote:I'm going to partly disagree with my learned colleague here. :D

It's absolutely true that you have to get the overall tone of the instrument. Without that, you'll never gel with it. But, the features are important too, as they dictate what sounds you can squeeze out of it.

I have a DSI Rev2. It's absolutely one of the best synths I've ever got my hands on. The interface is easy to use, with almost a button for everything, and with a well-thought-out menu system that is only 1 level deep. Where it beats many other synths, is the number of modulation options. The basic modulation matrix is 8 x 53 (8 sources, 53 destinations), so that means you can route stuff like aftertouch, velocity, pitch etc. to pretty much any parameter you can tweak with a knob. In addition, you have 4 LFOs, a step/gate sequencer, and an auxiliary envelope which can also modulate stuff.

Is it a bass synth? In my experience, no. It can do them well enough, but you may be better off using a suitable monosynth. That's not to say it doesn't have bass presence - it certainly does. I've got brass pads that'll flap trousers ankles.

If this is your first synth, I'd suggest looking at what bases you want that synth to cover. For £1300, you might be able to get two synths - one for pads/arps/leads, and one for bass. Just food for thought.

Cheers


I have dozens of synths - including a Prophet 10 and T8 - and have no intention of buying another hard ware synth for a very long time - and utterly dismissed the Rev2 when it came out. But - your post here has made me want to buy one :-)

I can't believe it. I thought I was immune from posts and reviews on synths - but - having read over your post here and then checked up it's specs - I bloody well would love to own one!

Don't know if you're the sales person of the year, or it's just a really good synth - but I'm going to have to fight off the temptation on this one. I especially love the idea of such a subtractive synth offering a complex modulation matrix and including aftertouch. Meanwhile - it's using DCOs, so can go squarely into Juno106 and JX8P territory (I own and love the Juno 106 too and love it). Then there's the ability to apply PWM to all it's waveshapes - including it's sawtooth! Wow! Overall - a far more interesting synth that I imagined!

Damn! I was to have my house painted this summer :-)
knolan
Supporting Member!
Supporting Member!
 
Posts: 469
Joined: Wed Jun 14, 2006 1:42 am
Location: Dublin, Ireland


Return to General Synthesizers

Who is online

Users browsing this forum: No registered users and 23 guests