Andromeda Boot Problem Repair

Discussions about anything analog, digital, MIDI, synth technology, techniques, theories and more.
Post Reply
flintholm
Newbie
Newbie
Posts: 1
Joined: Sun Mar 04, 2007 3:24 pm

Andromeda Boot Problem Repair

Post by flintholm » Sun Jan 26, 2020 2:55 pm

Hi dear synth lovers

I recently bought an Andromeda. I was told there was a problem when booting, but since this is a synth i´ve been wanting for a very long time, i took the chance and bought it, hoping to find a repair soloution.

When i boot, the welcome-screen comes up for 8 seconds, then it goes negative for 1 second and go back for 6 seconds and some strange characters appears in the topline.

I have a short youtube video here which shows the boot process:



I have tried to load new system (by holding the soft button 7 on boot) but i never come to the boot-loader.

I would be very happy for any feedback, comments or link to someone who can repair this. I live in Berlin, Germany but any qualified repair in Europe would do.

best regards Henning Flintholm

User avatar
madtheory
Supporting Member!
Supporting Member!
Posts: 5358
Joined: Mon May 01, 2006 12:45 pm
Real name: Tomas Mulcahy
Gear: Wurlitzer Opus 1536, Model F, Morovdis Arpeggiator, Maplin My First EQ, Jeff Wayne Thunderchild rack, Thermostat, Buck Owens' Moog.
Location: Cork, Ireland
Contact:

Re: Andromeda Boot Problem Repair

Post by madtheory » Sun Jan 26, 2020 9:45 pm


adhmzaiusz
Active Member
Active Member
Posts: 273
Joined: Tue Jan 29, 2008 8:27 am

Re: Andromeda Boot Problem Repair

Post by adhmzaiusz » Sat Feb 08, 2020 4:12 am

The answer you are looking for is probably one of the many solutions in this thread.

https://www.gearslutz.com/board/electro ... -boot.html
‹‡›

Post Reply