Anyone know if this pop is normal and I should just turn the synth on before my amp? Or do I have something going on here. It is also worth noting when I plug in the power supply to the synth, I see a flash of electricity inside by the jack.
Loud pop when turning on Moog Rogue
Forum rules
READ: VSE Board-Wide Rules and Guidelines
READ: VSE Board-Wide Rules and Guidelines
-
madphingers
- Newbie
- Posts: 4
- Joined: Mon Nov 14, 2011 7:02 am
Loud pop when turning on Moog Rogue
I recently got a Rogue and have been loving it. But I notice when I turn it on while it is plugged into my bass rig, there is a really loud pop through the speakers. I may have even burnt out my 18" driver on my Acoustic 301 cab because of this....
Anyone know if this pop is normal and I should just turn the synth on before my amp? Or do I have something going on here. It is also worth noting when I plug in the power supply to the synth, I see a flash of electricity inside by the jack.
Anyone know if this pop is normal and I should just turn the synth on before my amp? Or do I have something going on here. It is also worth noting when I plug in the power supply to the synth, I see a flash of electricity inside by the jack.
-
mharris80
- Junior Member
- Posts: 196
- Joined: Tue Dec 18, 2007 9:24 pm
- Gear: Korg M1
MicroKorg
Ensoniq ASR 88
Ensoniq ESQ-1
Roland JX-8P
Roland MKS-50
Yamaha RX7
M Audio Oxygen 49
AV Linux - Location: Robinson, IL
Re: Loud pop when turning on Moog Rogue
No matter what kind of sound reinforcement is used, it's always a good practice to turn the amps on last. Period.
-
Alex E
- Synth Explorer
- Posts: 2239
- Joined: Sat Dec 02, 2006 12:07 am
- Gear: Jupiter-6, Juno-60, Polysix, Emulator II, DX7, QX1, Arp Odyssey MKII, ESQ-1, Miami, M1r, Live 9, iMac MC309XX/A
- Location: Anaheim, CA
Re: Loud pop when turning on Moog Rogue
Yup. That's normal. Gotta turn on your amps/speaker/mixer last.
soundcloud.com/vectron
-
Phollop Willing PA
- Senior Member
- Posts: 840
- Joined: Sun May 04, 2008 3:47 pm
- Gear: Korg, Moog, Roland, Alesis, ARP, Yamaha, Future Retro
- Location: Nova Scotia
Re: Loud pop when turning on Moog Rogue
Or at least mute the mixer or amp's volume.
MOOGSig: Voyager/Theremin, ROLAND: JP8000/MC505/MC50/SH1000/Octapad1/RE 20, CASIO VLtone, KORG: Prophecy/MS2000R/Kaos Pad2/D3200/D888/SDD4000/M3, BOSS SP202/DR110, YAMAHA:CS40M/QX7/WX7/QY10/Reface DX, ARP Exp, MACBETH M5, FR ORB, SONNET, ALESIS SR18
-
madphingers
- Newbie
- Posts: 4
- Joined: Mon Nov 14, 2011 7:02 am
Re: Loud pop when turning on Moog Rogue
Ok, thanks for the replies. Now if I may, I'd like to hijack my own thread and ask another question...
Does anyone know the specs for replacement slide pot for the Rogue. I am aware there are 3 or 4 different ones you need to use.
I need to know:
Resistance
Wattage
Size/Dimensions
Series
Adjustment Type
I would like to try and order some from Digikey or Mouser to save a little money if I can..
Does anyone know the specs for replacement slide pot for the Rogue. I am aware there are 3 or 4 different ones you need to use.
I need to know:
Resistance
Wattage
Size/Dimensions
Series
Adjustment Type
I would like to try and order some from Digikey or Mouser to save a little money if I can..
-
Phollop Willing PA
- Senior Member
- Posts: 840
- Joined: Sun May 04, 2008 3:47 pm
- Gear: Korg, Moog, Roland, Alesis, ARP, Yamaha, Future Retro
- Location: Nova Scotia
Re: Loud pop when turning on Moog Rogue
I'd start a new thread on that subject if I were you... 
MOOGSig: Voyager/Theremin, ROLAND: JP8000/MC505/MC50/SH1000/Octapad1/RE 20, CASIO VLtone, KORG: Prophecy/MS2000R/Kaos Pad2/D3200/D888/SDD4000/M3, BOSS SP202/DR110, YAMAHA:CS40M/QX7/WX7/QY10/Reface DX, ARP Exp, MACBETH M5, FR ORB, SONNET, ALESIS SR18
-
madphingers
- Newbie
- Posts: 4
- Joined: Mon Nov 14, 2011 7:02 am
Re: Loud pop when turning on Moog Rogue
will do thanks!