All I get when I save the patch is:
*MEMORY*
A-1
A-1
How Do I Name a Patch on CZ-3000?
Forum rules
READ: VSE Board-Wide Rules and Guidelines
READ: VSE Board-Wide Rules and Guidelines
How Do I Name a Patch on CZ-3000?
Forgive me if this is a silly question (I have checked the manual), but how do I give a custom name to a patch I've created on my CZ-3000? I just picked it up yesterday and I am still learning its ins-and-outs.
All I get when I save the patch is:
All I get when I save the patch is:
Yamaha SY77
Casio CZ-3000
Casio SA-5
BOSS DR-220E
Previously owned: Yamaha DX21, Roland JX-3P, Ensoniq SQ-80, Roland D-50
Casio CZ-3000
Casio SA-5
BOSS DR-220E
Previously owned: Yamaha DX21, Roland JX-3P, Ensoniq SQ-80, Roland D-50
-
CZ Rider
- Active Member
- Posts: 265
- Joined: Wed Oct 24, 2007 12:31 am
- Location: The Edge of Space
- Contact:
Re: How Do I Name a Patch on CZ-3000?
That's all you get from those early digitals from Casio. Seems like it should, as it does have a two row LCD display, and the ROM presets have names. The only CZ that could save patch names was the CZ-1. Really typical of the early days of patch memory. Most synths from that time only saved a number to locate your patches.Italo_DX wrote: All I get when I save the patch is:
*MEMORY*
A-1
Good trivia question though. I wonder what was the first synth to save patches with names.
-
Z
- Synth Explorer
- Posts: 3548
- Joined: Wed May 09, 2007 3:08 am
- Gear: Bubble wrap, Styrofoam, boxes, packing tape
- Location: Docking Bay 94 (Dallas, TX)
- Contact:
Re: How Do I Name a Patch on CZ-3000?
Ensoniq ESQ-1 ?CZ Rider wrote: Good trivia question though. I wonder what was the first synth to save patches with names.
Re: How Do I Name a Patch on CZ-3000?
Yikes! Thanks for the info. This is the only synth I've owned with an LCD that didn't allow custom names. As to the trivia question... I know my DX21 allowed custom names and it predated the ESQ-1.
Yamaha SY77
Casio CZ-3000
Casio SA-5
BOSS DR-220E
Previously owned: Yamaha DX21, Roland JX-3P, Ensoniq SQ-80, Roland D-50
Casio CZ-3000
Casio SA-5
BOSS DR-220E
Previously owned: Yamaha DX21, Roland JX-3P, Ensoniq SQ-80, Roland D-50
-
synthparts
- Senior Member
- Posts: 779
- Joined: Sun Oct 09, 2011 12:05 pm
- Location: SF Bay Area, CA
- Contact:
Re: How Do I Name a Patch on CZ-3000?
My pre-MIDI Kawai SX-210 has patch names with alphanumeric LED display...Z wrote:Ensoniq ESQ-1 ?CZ Rider wrote: Good trivia question though. I wonder what was the first synth to save patches with names.
Vintage Synth Parts - http://www.synthparts.com
-
madtheory
- Supporting Member!
- Posts: 5436
- Joined: Mon May 01, 2006 12:45 pm
- Real name: Tomas Mulcahy
- Gear: Wurlitzer Opus 1536, Model F, Morovdis Arpeggiator, Maplin My First EQ, Jeff Wayne Thunderchild rack, Thermostat, Buck Owens' Moog.
- Location: Cork, Ireland
- Contact:
Re: How Do I Name a Patch on CZ-3000?
DX-7 has patch naming too. Looks like Kawai is the oldest so far?
You can name patches in any computer editor (CZ Librarian, Galaxy, Sound Diver and MIDIQuest are the ones I've used, back in the nineties mostly) and they are preserved in the CZ-3000. Dump them over to a CZ-1 and voila- there are the names. CZ-1 velocity and AT settings are preserved as well.
If you like the 3000, get a CZ-1. Quite a bit more fun, mainly with the layering- 64 locations to store them with detune and level settings. 3000 only lets you store one layer, and no detune.
You can name patches in any computer editor (CZ Librarian, Galaxy, Sound Diver and MIDIQuest are the ones I've used, back in the nineties mostly) and they are preserved in the CZ-3000. Dump them over to a CZ-1 and voila- there are the names. CZ-1 velocity and AT settings are preserved as well.
If you like the 3000, get a CZ-1. Quite a bit more fun, mainly with the layering- 64 locations to store them with detune and level settings. 3000 only lets you store one layer, and no detune.