I also posted this on another synth forum, please excuse the redundancy if you already saw it.
My Origin rack had a long time issue of not booting until the second power cycle, which seems to be a pretty common condition.
In May 2013, it stopped booting at all and I started conversing with Arturia tech support by their email system. After a number of weeks they had me try a procedure to reprogram something in the USB interface, but that didn't help my unit regain functionality. This was the end of June 2013.
I started trying to get an RMA number with weekly emails so I could ship the unit for repair, but because of it being summertime and long holidays in France, I didn't get the RMA until two months later at the very end of August. The unit was received by the US distributor in October.
After hearing nothing for two months, I got worried that the package might have been misplaced, so I contacted the US distributor in December and found it had indeed been delivered to Arturia US. I was also told in a December email that if the US office couldn't repair it, I would get a replacement.
I began sending weekly inquiries about the status of the instrument and didn't get any replies for six weeks, until today, Feb 7, 2014. I was told in an email that my synth will be shipped to France "next week" for repair as the US office couldn't fix it. It took them nearly four months for this determination...and apparently no promised replacement unit.
I have to say this is the worst experience I have ever had in 40 years of dealing with music equipment manufacturers. I have some sympathy for the fact the company must be growing rapidly, but they really have no viable support system for their customers. No published phone number on their website. All support channelled through email. Average response time by email has been 4-6 weeks.
Please consider this story when attracted by the low prices of their new hardware, support is a corner being cut by Arturia.
Unfortunately, my Origin wasn't low priced at all. It was priced like a synth that might be used in a professional environment. I guess I was silly to expect a professional level of support.
Anyhow, as always, buyer beware.
Regards,
MM
Arturia Origin Fail/Arturia Fail
Forum rules
READ: VSE Board-Wide Rules and Guidelines
READ: VSE Board-Wide Rules and Guidelines
- mmp
- Junior Member
- Posts: 112
- Joined: Thu Sep 13, 2007 11:59 am
- Real name: Michael McInnis
- Gear: VS VL-1 Varios VoyagerRME MinimoogD CS60 SY-2 Kronos M3X MW1 2600 PS3100 DV-800 Z1 Chroma XT Blofeld k5K PolyMoog Avatar MS20 PE-1000 P6 OB6 m4000d
- Band: Iberquez
- Location: Portland, Maine USA
- Contact:
Arturia Origin Fail/Arturia Fail
Michael McInnis Productions
www.mm-pro.com
www.mm-pro.com
- mmp
- Junior Member
- Posts: 112
- Joined: Thu Sep 13, 2007 11:59 am
- Real name: Michael McInnis
- Gear: VS VL-1 Varios VoyagerRME MinimoogD CS60 SY-2 Kronos M3X MW1 2600 PS3100 DV-800 Z1 Chroma XT Blofeld k5K PolyMoog Avatar MS20 PE-1000 P6 OB6 m4000d
- Band: Iberquez
- Location: Portland, Maine USA
- Contact:
Re: Arturia Origin Fail/Arturia Fail
i got an email today saying they are shipping me a new synth.
I really hope this is real, but I kind of have this little voice saying "your check is in the mail" ringing in the back of my head.
I really hope this is real, but I kind of have this little voice saying "your check is in the mail" ringing in the back of my head.
Michael McInnis Productions
www.mm-pro.com
www.mm-pro.com
- mmp
- Junior Member
- Posts: 112
- Joined: Thu Sep 13, 2007 11:59 am
- Real name: Michael McInnis
- Gear: VS VL-1 Varios VoyagerRME MinimoogD CS60 SY-2 Kronos M3X MW1 2600 PS3100 DV-800 Z1 Chroma XT Blofeld k5K PolyMoog Avatar MS20 PE-1000 P6 OB6 m4000d
- Band: Iberquez
- Location: Portland, Maine USA
- Contact:
Re: Arturia Origin Fail/Arturia Fail
New synth arrives today.
Issue resolved. Over & out.
Issue resolved. Over & out.
Michael McInnis Productions
www.mm-pro.com
www.mm-pro.com