Teisco 60F - dead VCO?

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
radek tymecki
Active Member
Active Member
Posts: 434
Joined: Sun Jul 09, 2006 9:04 pm
Location: Poland
Contact:

Teisco 60F - dead VCO?

Post by radek tymecki » Sun Apr 09, 2017 3:27 pm

I guess I'm not lucky with the synths at the moment haha. WCO is not working... the noise slider has effect and reacts on all controls. so i can modify it with lfo, filters and envelope. but vco slider does nothing. synth section is quiet. range and waveform selector has no effect, only green leds are getting lit or start reacting [only saw, pulse is dead]. anyway there is no sound. i've checked ca3080 and other 4558/072 and they seem to be ok. what can it be then? dead ua726?

jxalex
Active Member
Active Member
Posts: 475
Joined: Wed Dec 07, 2016 6:05 am
Gear: enough
Location: Sweden

Re: Teisco 60F - dead VCO?

Post by jxalex » Sun Apr 09, 2017 10:27 pm

No effect or does it has just 2 positions possible (max and min, which can be obtained?)
check at first if the slider gives out the driving voltage from its slider pin as it should be.
these synths are really old and the VCO slider perhaps.

Post Reply