ROLAND SYSTEM 100M VCO MODULE

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.

ROLAND SYSTEM 100M VCO MODULE

Postby bellerophone » Fri Mar 16, 2018 9:22 pm

Hi

I m interested doing some fine tuning on my VCO (M110). I opened the case and there are few white and blue plastic
screws (knobs). Unfortunately there are no label next to them so I cant figure out what is going where and of course I dont want to start playing with it. My service manual is of very low quality and I cant read it.
Does anyone has a good signed board picture or can guide me through this?

THANKS IN ADVANCE
bellerophone
Newbie
Newbie
 
Posts: 2
Joined: Sun Nov 11, 2012 1:33 pm

Re: ROLAND SYSTEM 100M VCO MODULE

Postby locosynth » Sat Apr 14, 2018 12:54 pm

Here is the link to the service manual page which describes the tuning procedure.
http://www.florian-anwander.de/roland_s ... how24.html

I used it to tune my System-500 512 VCO. It’s easy. Just use an oscilloscope to get the best results. I used one on my iPad using my audio interface.
locosynth
Newbie
Newbie
 
Posts: 1
Joined: Sat Apr 14, 2018 12:50 pm


Return to HELP!

Who is online

Users browsing this forum: No registered users and 18 guests