Page 1 of 1

Reloading Patches for a Roland D-10

PostPosted: Sun Apr 15, 2018 3:25 pm
by D-10lover
After 11 years in storage, I'm trying to set up my Roland D-10 for my grandson to play with. Although both the original patches and M-256E memory card are still functioning, I figure it's past time to change batteries then reload the patches for both. I have the patches on Yamaha MDF1 midi filer disks, but the filer itself won't work anymore. I got a Roland UM-One mk2 usb-midi interface thinking I could just download patches and transfer, but can't find any info on how to do that from a Windows 10 computer. The only thing I can think to do is to change the M-256E battery, transfer the D-10 patches to the memory card, change the D-10 battery, then transfer the patches back. I'd lose my memory card patches in that process, but can't seem to find any other info. I'd greatly appreciate any suggestions?

Re: Reloading Patches for a Roland D-10

PostPosted: Sun Apr 15, 2018 3:45 pm
by meatballfulton
Get MIDI-OXfor your computer, it can do sysex transfers.

Re: Reloading Patches for a Roland D-10

PostPosted: Mon Apr 23, 2018 11:26 am
by Mr_Mojo_Risin
You can download the D-10 Factory Patches from Roland Corp, U.S.A. at this link:
https://www.roland.com/us/support/general_apps_tools/
(Search for D-10 at this page. Loading instructions are in the *.ZIP file)

Other useful info for the D-10 can be found at the D-110 Website on the PATCHES, UTILITIES and INFO pages here http://llamamusic.com/d110/

Re: Reloading Patches for a Roland D-10

PostPosted: Mon May 14, 2018 7:26 am
by garrytaylor987
Facing same sot of issue, need a help immediately