roland jv80 power supply

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
catman
Newbie
Newbie
Posts: 4
Joined: Thu Feb 14, 2019 11:36 pm

roland jv80 power supply

Post by catman » Thu Feb 14, 2019 11:42 pm

Hi out there, does anyone know what the output voltages should be on a roland JV80 power supply 1 to 5??
looked at service manual and service notes but it doesn't say. Thanks in advance, Phil.

User avatar
madtheory
Supporting Member!
Supporting Member!
Posts: 5130
Joined: Mon May 01, 2006 12:45 pm
Real name: Tomas Mulcahy
Gear: Flangebeast Mk1, Plonkotron, Morovdis Arpeggiator, Maplin My First EQ, Cabaret Voltaire, Jeff Wayne Thunderchild rack, thermostat, Buck Owens Moog.
Band: Minim
Location: Cork, Ireland
Contact:

Re: roland jv80 power supply

Post by madtheory » Fri Feb 15, 2019 8:28 pm

It does say, on page 17, circuit diagram. Points are labelled A, B etc.

catman
Newbie
Newbie
Posts: 4
Joined: Thu Feb 14, 2019 11:36 pm

Re: roland jv80 power supply

Post by catman » Sun Feb 17, 2019 8:11 pm

Hi there Madtheory, on the service notes i have the power supply diagram is on page 22 and notes the input voltages but not the output, just trying to see if the transformer is kaput and could be replaced by something else, a bit of a Frankenstein job.
Ta.

User avatar
madtheory
Supporting Member!
Supporting Member!
Posts: 5130
Joined: Mon May 01, 2006 12:45 pm
Real name: Tomas Mulcahy
Gear: Flangebeast Mk1, Plonkotron, Morovdis Arpeggiator, Maplin My First EQ, Cabaret Voltaire, Jeff Wayne Thunderchild rack, thermostat, Buck Owens Moog.
Band: Minim
Location: Cork, Ireland
Contact:

Re: roland jv80 power supply

Post by madtheory » Mon Feb 18, 2019 11:28 am

Ya they're written there on that page as well: Outputs to boards on the right of the diagram: "D5V" "A+12V" "A-12V" etc. etc.

http://www.polynominal.com/roland-jv80/ ... manual.pdf

catman
Newbie
Newbie
Posts: 4
Joined: Thu Feb 14, 2019 11:36 pm

Re: roland jv80 power supply

Post by catman » Mon Feb 18, 2019 2:19 pm

Ah, ok I see what you mean, not getting anything like those voltages so tranny must be buggered. Ta.

Post Reply