Oberheim DMX - hi-hat "closed" is just "open" but quieter (SOLVED)

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
User avatar
DesolationBlvd
Active Member
Active Member
Posts: 277
Joined: Tue Mar 06, 2012 1:24 am

Oberheim DMX - hi-hat "closed" is just "open" but quieter (SOLVED)

Post by DesolationBlvd » Sat Aug 15, 2020 6:33 pm

I have a curious issue with my new Oberheim DMX - the hi-hat "closed" just plays the "open" but quieter, like the envelope is not being activated. There is also a weird high-pitched noise on top of the kick, that goes up or down when I use the tuning pot on the kick card, and that follows the ROM chip.

I have a feeling that for the kick, the ROM itself is corrupted and I'll buy a new one. But before I buy a replacement hi-hat card, I want to see why the envelope doesn't affect it.

EDIT: Turns out the hi-hat values were wrong. The service manual shows the following values, and they were the values my card had:
R8: 2k7
R12: 15r
R17: 1k5
C3: 6u8

The values on the DMX Files site were the correct values:
R8: 3k6
R12: 6k8
R17: remove
C3: 2u2
Moog Matriarch
Oberheim OB-8/DSX/DMX
Sequential Prophet 2002
Ensoniq Mirage/SQ-80
Roland JP-8/SH-101/RS-09/Kiwi-30/D-550
Korg MS-20 Kit/ARP Odyssey FSQ
Yamaha TX7/DX100
Waldorf Microwave 1
Simmons SDSV/SDS9
Elektron Analog RYTM

Post Reply