Roland Juno 106 Write Button Memory Issue

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
Posts: 1
Joined: Thu Aug 27, 2020 11:31 pm

Roland Juno 106 Write Button Memory Issue

Post by Synthusiast » Thu Aug 27, 2020 11:47 pm


I am restoring a Juno 106 and am having an issue with my write button.

I installed a battery clip/new battery and loaded the factory presets via the tape load. They loaded fine, sound great. If I turn off the synth and back on after waiting, they are still there.

However, if I try and change a patch and write it to a bank/patch, it doesn't work and reverts all patches back to that blank patch sound.

What is going on? Is this a logic issue? I can't seem to find anyone else who has had this problem.

I have checked that the Ram is getting 3v when off and 5v when on and it does.

I've already calibrated the synth and replaced all tac switches as part of the restore.
Im at a loss, thoughts?

Post Reply