Page 1 of 1
Removing the keyboard of the Korg Poly61
Posted: Sun Oct 28, 2007 4:42 pm
Does anyone know how to remove the keyboard of the Poly61? I've opened it up and can't figure out where to detatch the keys/keyboard so that I can clean the contacts. Some of the keys do not sound or sound only intermittently. However all the oscillators work as I have been able to test them through the Chord Memory and Arpeggio functions.
Posted: Sun Oct 28, 2007 4:49 pm
Well I've gotten it off and there is a thick layer of dust on the contacts. What's the best way to clean these contacts? I have WD40 and Radioshack Contact Cleaner on-hand.
Posted: Sun Oct 28, 2007 5:22 pm
Here's everything you need to know. I followed these instructions for my Prophet-600, worked great.
http://www.oldcrows.net/~oldcrow/synth/ ... clean.html
Posted: Sun Oct 28, 2007 5:28 pm
Thanks this looks promising!
Re: Removing the keyboard of the Korg Poly61
Posted: Mon May 13, 2019 1:47 am
I know this thread is old, but I guess what op was missing is you have to remove a few screws on the bottom of the case, in order for the keyboard to come off.