Korg Poly 800 II: control change numbers and software-editor

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
User avatar
sepiakeys
Supporting Member!
Supporting Member!
Posts: 77
Joined: Tue Mar 21, 2006 12:22 pm
Gear: Hardware Synthesizers and Guitar Effects
Band: There will be Lions
Location: Switzerland

Korg Poly 800 II: control change numbers and software-editor

Post by sepiakeys » Mon Dec 03, 2007 11:50 am

Hello

I got a Korg Poly 800 MK II. It has inhanced midi-implementation and can read sysex. Can I use a Midi-controller for programming this synth (by assigning the cc-numbers to the various knobs)?

I do not have the manual, so I need to get the midi-parameter-table somewhere (if something like this exists...). Can Anyone Help me out?

Ist there a free software-editor available for the Poly 800 II ?

Many thanks!!
Good programming is worth more than the most expensive synthesizer.

User avatar
Huppo
Active Member
Active Member
Posts: 485
Joined: Thu May 19, 2005 2:58 pm
Gear: V-synth, broken Fusion 6HD, HPD10, MP-7, 60+ guitars, etc.
Band: naught
Location: Western Mars
Contact:

Post by Huppo » Mon Dec 03, 2007 1:52 pm

Sysex and CC# are not the same thing. The Poly 800 MkII does not, to my knowledge, read CC#s.

Have a read HERE
~huppo

Please feel free to add me to your Foes list.

User avatar
insky
Junior Member
Junior Member
Posts: 188
Joined: Thu Jun 01, 2006 2:51 am
Location: Southern Utah

Post by insky » Mon Dec 03, 2007 11:05 pm

No you can't do this. The SysEx implementation on this Poly 800 only means you can upload patches to it via SysEx.

But SysEx and MIDI CC are two very different things. There are some 80's synths that let you edit them in real time via SysEx...such as the Roland JX-8P. But to do that you either need to use software or a MIDI controller capable of handling SysEx...Such as the Behringer BCR2000.

MIDI CC's came later in the 90's. It's a much more simplified, uniform way of editing synths. With SysEx each and every different synth had it's own language of SysEx for each parameter. With MIDI CC's it's a bit more unified.
Stuff I own:
X Station
ESQ-1
JX-8P
Poly 800
MaxiKorg 800DV
Elka Rhapsody 610

Post Reply