Micron Sustain Pedal help

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
Denms20
Junior Member
Junior Member
Posts: 153
Joined: Mon Sep 20, 2004 2:50 am
Gear: Korg MS-20, CX-3, SP 100, Roland JX8P, Sound Canvas, Hammond CV, M3, S-6,L-100 Rhodes , Wurly, D-6 clav, Yamaha TX-7, Crumar T-1, Casio CZ-101
Location: Pa, USA
Contact:

Micron Sustain Pedal help

Post by Denms20 » Sun Oct 05, 2008 4:22 pm

Is there an enable switch somewhere in the menu's for the sustain pedal? I have a friend with a micron that wants to use it as a controller for an old roland sound canvas, and right now it doesn't sustain on the sound canvas when you plug the sustain pedal inthe micron. I've read the whole micron manual and can't find it anywhere there, and I have to go to hishouse and troubleshoot it, I'd like to go a bit prepared.
Thanks, Den
Hammond CV, M3, s6, Korg MS-20, SP-100, CX-3, Hohner D-6, Roland JX8P, Sound Canvas, Yamaha Tx7, Casio CZ101, Rhodes, Crumar T1
http://www.organdenstudio.com

User avatar
Bross
Newbie
Newbie
Posts: 49
Joined: Thu Dec 21, 2006 5:50 am
Location: Nashville TN
Contact:

Re: Micron Sustain Pedal help

Post by Bross » Sun Oct 05, 2008 11:38 pm

Each "Part" has different sus and expr pedal settings. See page 42 of the manual.

Denms20
Junior Member
Junior Member
Posts: 153
Joined: Mon Sep 20, 2004 2:50 am
Gear: Korg MS-20, CX-3, SP 100, Roland JX8P, Sound Canvas, Hammond CV, M3, S-6,L-100 Rhodes , Wurly, D-6 clav, Yamaha TX-7, Crumar T-1, Casio CZ-101
Location: Pa, USA
Contact:

Re: Micron Sustain Pedal help

Post by Denms20 » Mon Oct 06, 2008 2:29 am

Thanks, I'll make sure they're set right.
Hammond CV, M3, s6, Korg MS-20, SP-100, CX-3, Hohner D-6, Roland JX8P, Sound Canvas, Yamaha Tx7, Casio CZ101, Rhodes, Crumar T1
http://www.organdenstudio.com

Denms20
Junior Member
Junior Member
Posts: 153
Joined: Mon Sep 20, 2004 2:50 am
Gear: Korg MS-20, CX-3, SP 100, Roland JX8P, Sound Canvas, Hammond CV, M3, S-6,L-100 Rhodes , Wurly, D-6 clav, Yamaha TX-7, Crumar T-1, Casio CZ-101
Location: Pa, USA
Contact:

Re: Micron Sustain Pedal help

Post by Denms20 » Sun Oct 12, 2008 8:03 pm

Problem solved, it turns out it wasn't a setting at all but a bad sustain pedal.
Hammond CV, M3, s6, Korg MS-20, SP-100, CX-3, Hohner D-6, Roland JX8P, Sound Canvas, Yamaha Tx7, Casio CZ101, Rhodes, Crumar T1
http://www.organdenstudio.com

Post Reply