Trident mk 1 schems..?

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
paugui
Active Member
Active Member
Posts: 355
Joined: Fri Aug 19, 2005 12:47 pm
Location: Marinha Grande, Portugal / Oslo, Norway

Re: Trident mk 1 schems..?

Post by paugui » Sat Mar 26, 2011 4:53 pm

Thanks a lot for letting me know :)

It sometimes works and sometimes don't...
And some other times it even seems to morph...

I hope it's something really that simple, hopefully will have some time to take care of that during this Easter :)

sam
Expert Member
Expert Member
Posts: 1303
Joined: Wed Jun 21, 2006 10:09 pm
Location: Europe

Re: Trident mk 1 schems..?

Post by sam » Sat Mar 26, 2011 9:12 pm

If your good at soldering it's worth a try...But be careful.

Open the synth...2 screws on the rear and 6 on the face plate.

The programmer board has 3 sets of cables all in one area going to it.

It's to the left of those cables you should re solder..
Lam memorymoog.Sonic six.Vp330 mk1.SH101.OSCar.ARP odyssey..multivox mx3000.Solina stringsynth.polivox
ms20/50.Andromeda. OBX.
Prophet 5 Pro-one. Wasp.EMS AKS.

sam
Expert Member
Expert Member
Posts: 1303
Joined: Wed Jun 21, 2006 10:09 pm
Location: Europe

Re: Trident mk 1 schems..?

Post by sam » Sat Apr 02, 2011 7:45 am

I will need some more advice....I want to set up the filter amount on the synth section.

The reverse env is not working as it should...I have read the set up section of the service manual but it's a little confusing. Has anyone done this here and can give some tips...?
Lam memorymoog.Sonic six.Vp330 mk1.SH101.OSCar.ARP odyssey..multivox mx3000.Solina stringsynth.polivox
ms20/50.Andromeda. OBX.
Prophet 5 Pro-one. Wasp.EMS AKS.

Post Reply