Page 1 of 1

Fizmo Audio In

Posted: Tue Jul 26, 2011 5:53 pm
by FX23
how does the fizmo audio in work? ive got a drum machine plugged into the input but im not hearing anysound?

Re: Fizmo Audio In

Posted: Tue Jul 26, 2011 6:20 pm
by balma
Must go to the settings mode screen, scroll to the end, it says LIn (Line in) just turn it on and press save, otherwise it will return to Off when you turn off the Fizmo. Also you must move the thin knob that is next to the Line Input.

It's on the manual.

Re: Fizmo Audio In

Posted: Tue Jul 26, 2011 8:15 pm
by FX23
what is settings mode?

Re: Fizmo Audio In

Posted: Tue Jul 26, 2011 8:46 pm
by Psy_Free
Press the MIDI button & scroll with the +/Yes until the LnL parameter is displayed. Then change the value.

Re: Fizmo Audio In

Posted: Wed Jul 27, 2011 12:22 pm
by FX23
thanks i tried that, the incomming sound seems to be only effected by the fizmo effects, is this correct?

Re: Fizmo Audio In

Posted: Wed Jul 27, 2011 12:29 pm
by Psy_Free
Yes. Unless you use the vocoder insert effect, then the Fizmo patch sound will be shaped by the incoming signal.

Re: Fizmo Audio In

Posted: Wed Jul 27, 2011 4:16 pm
by FX23
Ok Thanks!

Re: Fizmo Audio In

Posted: Wed Nov 02, 2011 9:28 pm
by DLovas
just to resurrect this topic real quick - do you know if the Line in supports only MONO signals? or if i were to go out from the line source from a phones jack - would it then be able to take the stereo signal? I ask this because there is only one input jack on the fizmo's rear. Thanks

Re: Fizmo Audio In

Posted: Thu Mar 06, 2014 12:58 pm
by Syn-Fi
hi david,
did you discover the answer to this? I just wished to know myself without digging into the manual.

Re: Fizmo Audio In

Posted: Fri May 16, 2014 2:26 am
by DLovas
Ah yes, I've learned that it is MONO.