Parts for VINTAGE SYNTHESIZERS.....

DIGITAL SCREAMS · Post by **DIGITAL SCREAMS** » Fri Jan 04, 2008 7:47 pm

If this has not been posted before....perhaps a moderator could sticky this. The links below offers an invaluable source of parts for a huge range of synths etc. Now you dont have to worry so much about sourcing 'rare' parts.

http://www.vintageplanet.nl/ (New Old Stock parts. Huge catelog. All the main manufacturers)

http://www.technologytransplant.com/ (Brand New Stock parts. Custom built replacements + Cloning PCB's and Components)

http://www.synthparts.com/ (Vintage synth chips including CEM, SSM, Roland IRxxxx, Yamaha IGxxxxx. Pots and Sliders. Knobs and Slider Caps. Keys, Switches and Jacks. Email to inquire about other parts)

http://stores.ebay.co.uk/North-Music-Ltd (Synthesizer repairs & supplier of vintage spares and musical equipment: Roland, Boss, Korg, Yamaha, Kawai, Sequential Circuits and Casio)

http://www.route66studios.com/ (Brand New Replacement Floppy Drives and synth parts/batteries - Akai Samplers, Emu Emulators, Emax, SP1200 etc, Yamaha DX7MKFD, Ensoniq SQ80, Mirage, Korg DSS1, 01/Wfd, T1, T2, T3 etc etc)

http://www.synthrestore.co.uk/ (Email Adrian for help with servicing/restoring analog and digital synths + sourcing parts)

http://www.synthrepairservices.com/ (Email James for help with servicing/restoring analog and digital synths + sourcing parts)

http://www.rlmusic.co.uk/service_01.html (Contact Richard or Kent Spong for help with servicing/restoring analog and digital synths)

DS

ianjhicks · Post by **ianjhicks** » Fri Jan 04, 2008 8:17 pm

brilliant post, thanks!

Post by **Jack Spider** » Fri Jan 04, 2008 8:45 pm

I'll shift it over to 'Help', where it can be stickied, along with the techs sticky.

Post by **WDW** » Fri Jan 04, 2008 9:24 pm

Stuck.

WD

devious · Post by **devious** » Sat Jan 05, 2008 1:55 am

synthparts.com is also an invaluable source.

i've used the above posted link a few times for some missing fader caps and such! pretty good service and very nice guy.

Another guy I've dealt with, Bob Wiegel [I do believe that's the proper spelling] from Sound Doctorin'

http://cu.imt.net/~sounddoctorin/

Great service, great prices! Recommended if you need pratt-reed bushings, by far the best price although you need to silicon lube them yourselves!

Great thread to have stickied!

-d

Post by **wiss** » Tue Jan 08, 2008 8:03 am

found this website for hard to find adapters

http://www.leadingqp.com/PA/adaptersNA.aspx

hageir · Post by **hageir** » Tue Jan 08, 2008 8:15 pm

wiss wrote:found this website for hard to find adapters

http://www.leadingqp.com/PA/adaptersNA.aspx

wow, thanks!
even european ones!!! (it's there in the upper right corner)

anyways, AC adapters are very hard to find, thanks!

Entropy Farmer · Post by **Entropy Farmer** » Fri Jan 18, 2008 8:28 pm

Lubricated Pratt-Reed bushings for 50 cents a pop: http://bushings.highspies.com/

edit: I suck

Post by **space6oy** » Fri Jan 18, 2008 9:43 pm

Entropy Farmer wrote:Lubricated Pratt-Reed bushings for 50 cents a pop: http://bushings.highspies.com/

"July 2006

BUSHINGS ARE GONE!"

Entropy Farmer · Post by **Entropy Farmer** » Fri Jan 18, 2008 10:26 pm

space6oy wrote:
Entropy Farmer wrote:Lubricated Pratt-Reed bushings for 50 cents a pop: http://bushings.highspies.com/
"July 2006

BUSHINGS ARE GONE!"

OOF. So, uh, go here then...Errr...Yeah.

They need to make that bigger and greener, I guess.

DIGITAL SCREAMS · Post by **DIGITAL SCREAMS** » Mon Mar 24, 2008 12:22 pm

First post now contains updated links!

DS

Z · Post by Z » Mon Mar 24, 2008 3:14 pm

EDIT (Dec. 31, 2012)
I have keys the work with Roland HS-60, Juno 106, Jupiter 6 & Sh-101. They might work with other synths as well.
White / Natural keys: $10 shipped within Cont. US. Black / Flat / Sharp: $8 each shipped

I have keys from a Korg PolySix which also work with Mono/Poly, Poly 61 and others.
White / Natural keys: $10 shipped within Cont. US. Black / Flat / Sharp: $8 each shipped

I also have button caps / covers from a CPE-800 which will also work with Jupiter 8, TR-808, RS-09 mk2 and VP-330 mk2
Remaining colors are White, Light Blue and Dark Blue: $10 each shipped in Cont. US

I will ship WORLDWIDE for additional fee.

I also have some keys that fit early Ensoniq keyboards and a few Pratt-Read keys. Email me for details.

I may be parting out other gear, so be sure to "Like" my FaceBook page to be notified of new gear and parts for sale:
http://www.facebook.com/ZsFlippinGear

Z

xpander · Post by **xpander** » Tue Mar 25, 2008 12:17 am

organservice.com, P-R bushings for 37¢. drillspot.com (grainger) DC#7 lube for said bushings.

i've bought repro slider caps, replacement sliders and pots for my Jupiter-6, Opus 3 from Technology Transplant a/k/a chipforbrains on eBay. stuff is shipped from Hong Kong but they were quality parts.

http://www.technologytransplant.com/

Post by **space6oy** » Thu Apr 24, 2008 7:23 pm

i'd been digging around for a while for a MIDI to DIN SYNC converter to be able to slave my TR-808 to gear that doesn't have a DIN SYNC out. there are several options out there, but the one i went with i am thrilled by. guy in australia is making them, they're simply an adapter that attaches to a midi cable, plus they don't even need a power supply!

right now he's only sold 3 on ebay and doesn't have any more up for sale, but i'm sure he'll keep at it. drop him a line if you're interested!

Syn303 · Post by **Syn303** » Mon May 12, 2008 9:56 pm

I would add chips for brains in there too, as they are remaking a lot of parts for vintage synths now, except processors.

Parts for VINTAGE SYNTHESIZERS.....

Parts for VINTAGE SYNTHESIZERS.....

stumbled across this website for adapters

Re: stumbled across this website for adapters

MIDI to DIN SYNC converter