Have a listen to this:
First, the raw/dry poly 800 patch.
Then the onboard Delay added.
Does anybody know; is that crackling noise normal, or is my unit busted in some section?
Does the Poly 800 mk2 crackle ?
Forum rules
READ: VSE Board-Wide Rules and Guidelines
READ: VSE Board-Wide Rules and Guidelines
-
metrosonus
- Junior Member
- Posts: 134
- Joined: Tue May 08, 2007 8:35 pm
- Location: Tampa Fl.
- Contact:
Re: Does the Poly 800 mk2 crackle ?
I dont hear any crackling, but I would say the 800s are not know for their exceptionally clean sounds. I've never owned one that didn't have noise somewhere in it except my near mint ex800 i got from a friend.
Re: Does the Poly 800 mk2 crackle ?
You're kidding me. The second part of the soundclip. There's vinyl-like noise.metrosonus wrote:I dont hear any crackling
Anybody else ? Or am I deranged.
-
JNeidlinger
- Newbie
- Posts: 53
- Joined: Fri Jan 05, 2007 5:00 am
- Gear: MS-10, MS-2000, CZ-3000, JX-3P, JX-8P, ER-1, MSQ-700, Prophet-600, Poly-61, x0xb0x, OB-SX, Moog Slayer EX-800, Polivoks Filter, Yamaha GS-2, and on...
- Location: KalamaZOO, Michigan
Re: Does the Poly 800 mk2 crackle ?
I hear it loud and clear. My EX-800 doesn't have any noise like that. I would say check your signal path, but it sounds like the noise only comes into play when the on-board delay is added. I would find a service manual for the MK-II and locate the IC's for the on-board effects, and check them accordingly.