Juno 106 Power Conncections Help

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
Posts: 1
Joined: Fri Feb 02, 2018 11:07 pm

Juno 106 Power Conncections Help

Post by CyborgSix » Fri Feb 02, 2018 11:27 pm

I have a problem with the power supply in a Juno 106 from Australia.
I think I understand what needs to be done, but I'm not 100% sure.

I can see that:
1. The fuse is missing.
I will purchase a fuse and replace it

2. The (White & Black wires) need to be connected to the power socket/plug.
What pin do I connect the black wire to?
What pin do I connect the white wire to?

3. There is a green wire that I have no idea about.
Where do I connect the green wire?

I hope somone out there has experience with This synth and can offer some help.

Thanks in advance.
Here's a pic of the problem.

Post Reply