Hi
I'm having a hard time here, trying to send sysex to my WS EX. I'm using MIDIOX, buffer/number-set to 64/2
Using PC WIN7 and Steinberg Midex
Every time I send sysex, I have the sysex checksum error on my WS. Hence - only a half of the bank is loaded
How to fix this?
sysex checksum error - Korg WS
Forum rules
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
Re: sysex checksum error - Korg WS
Try slowing the transmission down. Also try having pauses between each bank chunk (eg send the Performance bank, wait, then send the Patch bank, wait, then send the Wave Sequence bank etc.).
Re: sysex checksum error - Korg WS
1)How to slow the transmission down?
2)Am I missing smth? I have one syx file, which contains usually on RAM bank!? load in MIDIoX - send to WS
How to make these pauses?
Re: sysex checksum error - Korg WS
Yes, one ram bank contains three dumps - eg for Ram1, there will be a dump for Ram1 Performances, one for Ram1 Patches, and Ram1 Wave sequences.
-
Mesmerised
- Newbie
- Posts: 45
- Joined: Sat Jun 28, 2014 1:35 pm
- Real name: Chris
- Gear: Minimoog, ELKA Rhapsody, MFOS Modular, Matrix 1000, K5000S, MI Ambika, Shruthi (3x) and Anushri, Sonic Potions LXR, JX-8P, D-50, ...
- Location: Munich, Germany
Re: sysex checksum error - Korg WS
Yep, go slow. I don't know MidiOX but in some tools you can slow down the transmission speed. (I use Sysex Librarian)
I remember having lots of problems with that (even completely crashing my WS just before the gig!
) until I updated the WS to FW 3.19.
I remember having lots of problems with that (even completely crashing my WS just before the gig!
) until I updated the WS to FW 3.19.