BCR2000 Template and instructions for using it with a Korg DW-6000
https://www.bwalk.com.au/DW6K/DW6k.html

Which trap got me so many times that I put a sticker to the back (before I start taking the synth apart) is the fact that the Outputs 7/8 do not work when the FX section is set to on! So if you get no signal on 7/8 out - that's why. They're not broken. Yes, it's in the manual somewhere... :roll: Th...

The old website address mentioned above for the CPJXWIN utility is no longer active.
The new website is: http://llamamusic.com/super-jx/utils.html

V301H wrote: ↑

Sat Nov 14, 2009 5:45 pm

Look on eBay for memory expansion. The SP-700 uses the same 4MB SIMMS as S-760 samplers which are usually under $10 each.

The info above is not correct!!!
The SP-700 DOES NOT use the same 4MB SIMMS as S-760 samplers
The SP-700 uses 30-pin SIMM's and the S-760 uses 72-pin SIMM's

annaxh wrote:Actually I have contributed the S50 firmware to the site that you have mentioned

Cool! Thanks for the upload. It was helpful being able to compare mine with a known working copy

SUCCESS!!! :yahoo: I guess if you spend enough hours trying every possible combination, something is bound to work. As mentioned earlier, I've burned firmware on several samplers and synths without any issues. Using the TL866 has been automatic... until now. All of the default settings worked on the...

this is very odd , indeed. Did you try burning the eproms on a clean install of tl866 software or on another machine? You never know ! I had used nec D27128D, and i remember that i had a few hiccups with the programmer as I was getting verification errors at least 2 or 3 times, but once verified it...

I am sorry to hear that you have problems with my uploads. The eprom dumps that I took are named Roland S50 Firmware.zip on DBWBP.COM, how do you know it is V1.2 ? Did you try swapping the eproms ? could it be that I wrote wrong IC number on the filenames? I highly doubt it because as I said I used...

Hi Mr_Mojo_Risin, you had contacted me via pm but i could not reply to you , because your account was set not to receive pms. Thanks for pointing this out. I've changed my account settings. Sheeeesh! I wonder how many PM's I've missed this past year from others! :shock: Yes... I've verified the fir...

I'm quite surprised nobody has mentioned http://www.synfo.nl yet. He uses a giant flatbed scanner for the highest quality scans and they are all free. Even if you have an existing version, it's worth checking to see if a newer, higher quality one is available. I do small PayPal donations from time t...

* * * UPDATE * * * I've found the solution for this problem and it is noted in the 11th message below - - - A question for any EPROM experts out there - - - Has anyone successfully copied the firmware on their S-50 by burning new EPROM's? I've been able to read and write firmware for eight of my sa...

You can download the D-10 Factory Patches from Roland Corp, U.S.A. at this link: https://www.roland.com/us/support/general_apps_tools/ (Search for D-10 at this page. Loading instructions are in the *.ZIP file) Other useful info for the D-10 can be found at the D-110 Website on the PATCHES, UTILITIES...

I think the the U-20 has a similar connector. These are called Wire Trap Connectors are are appropriately named :evil: It's not easily to see how these work at first glance. Press down on the top using a small flat-blade screwdriver and then pull the cable out. Here is a link with a diagram showing ...

The JV-880 and other models are unable to use any of the Patches on this board. You can only use the Waveforms. The SR-JV80-98 Experience II board is kind of a kludge. It does not work like the other boards in the SR-JV-80 series. Taken from the SR-JV80-98 Experience II user manual; " This 'tryout'...

Just another update. I've almost a whole row of Synthrotek now. I really dig how Steve is carving out a niche for himself by putting out basic modules instead of whacky wtf does that even do modules. Ditto on the line of Synthrotek DIY kits. The ECHO is one of my favorites. I ended up buying two of...