Great news everyone, I gave the mpc another clean & it works now, now my problem is getting qlink 10 to turn properly

right, so I went under the hood & cleaned everything out like you said, still got the error message. also turns out the qlink is soldered directly to the board & has nothing for me to change adjust the position on it

bought an mpc5000 recently & when I first turned it on I was greeted with an error message reading "audio sync error" there isn't much online on how to troubleshoot this problem, also qlink 10 doesn't seem to turn past 3 o'clock when it's supposed to go further.

I'm back, turns out the converter had fried a capacitor & I was able to resurrect it. power issues are fixed & it's reading the drive properly but it turns out that it's unformatted & I can't format it on the sampler because the drive doesn't show up disk menu, it does read the drive though! Now my ...

yeah, nvm... gonna have to close this thread because I just fried the hard drive while I was testing. I understood what you guys meant about termination, it was just the pins I was having trouble with.

hey, the scsi id on my sampler can be changed to whatever number you choose, I have it set at 2. 23 & 24 aren't shorted so I'm guessing the termination is off, the sampler manual says that both ends have to be terminated & I don't have anything else in the chain so should I just jump pins 23 & 24 an...

okay I think I found what I'm looking for: https://www.manualslib.com/manual/54867 ... =81#manual

so from what I understand, shorting would be just putting a connector between 2 of the terminal holes, right?

are those scsi to sd things easy to set up?

I don't really know where the termination point is because the jumpers aren't labeled properly so all I can do is guess

idk what I'm doing honestly

Hey guys, I recently got a hard drive for my EMUlator 4 & I managed to hook it all up without any smoke but for some reason the drive keeps showing up as multiple drives & then disappearing or falling asleep & freezing the sampler. When I press the info button it says that the drives have 0 everythi...

Wait, delete this thread, I found one

Ebay isn't giving me any results so I'm wondering if one of you guys would know where to find one.

http://www.ebay.com.au/itm/Yamaha-dx-10 ... Swf-VWXGJ2

$700AUD for a Yamaha DX100.

My starter was an MS-20 mini, it may look overwhelming but it's really quite a simple synth to use.

madtheory wrote:It's not as simple as it sounds. This WON'T work:


but this KENTON box will.

I've actually had trouble with those leads before, I bought an M-Audio Uno to replace it. they're much cheaper than the midi host boxes.