OK, so actually I found out that on the Groovebox settings you need to turn on (+) all of the tracks to have Midi Rx (Midi Rx Sw P/ Midi RX Switch). And you need to have SYNC mode set to Slave (as you mentioned) and KBD off. See the Groovebox settings I found for achieving my original goal below (so...

This is very helpful, I'm going to give it a shot.

You are totally right it's hardcoded midi channels, and that's part of the problem, is that my BSP only has 3 sequence channels, so I can only send to (for example: R, 1, and 2, though I could edit the BSP settings to send to any 3 of the groovebox channels). The question is, can I sequence the unus...

hi there, I have a Beatstep pro as master and the Roland Groovebox (MC505) as slave because I find the BSP more intuitive and i love the patches on the Groovebox. However the beatstep pro only has three sequences (R and 1 and 2) and there are 5 unutilized tracks on my groove box that I'd love to use...

This is incredibly helpful. Knowing where to look in the manual too!!!
THANK YOU!!!!

Hi all, I have 4 different samples in the 4 structure slots on my roland S-220. I have hooked it up to a midi controller, my beatstep pro, setting it up as channel 10, the drum channel. On my Beatstep drum pads, I can assign various pads different midi CC , based on values 1-127 I think. Can I do th...

I did a hard reset on the BSP and it fixed the problem. I still don't know what was happening but that did it. Thanks so much for your help @meatballfulton!!

Hi!I downloaded the midi controller! What should I be looking for? This is what happened when I pressed PLAY on the BeatStep on a pattern that was totally blank on the beat. Not sure if this helps: 17:12:56.721 From Arturia BeatStepPro SysEx Universal Real Time 6 bytes F0 7F 7F 06 02 F7 17:12:56.722...

Thanks so much for your response, I really appreciate your help. When I program an empty pattern or a drum pattern on the yamaha and press play on the yamaha it's all good. But when I trigger it through the BeatStepPro, it triggers the crash on every step though also plays the actual pattern. Same f...

thanks so much for the response. I looked at the midi control center / drum map for the beatstep and every step is appropriately mapped to different yamaha notes. I can hear the patterns I'm writing on both the beatstep and the yamaha and each pad is assigned a different drum note but overlayed on t...

My RX11 is acting weird, sending the crash cymbals on every step to my BeatStepPro sequencer. it used to work, not sure what happened. The hardware works on its own, but when I hook it up, the BStep triggers the crash cymbals on every single step regardless of the underlying pattern. I have tried th...

Hello there! I have an old Yamaha Rx11 drum machine and was wondering if anyone could help. It used to work with my Arturia Beatstep pro sequencer but now it is acting weird, sending the crash cymbals to every step along with the patterns I'm programming (on either the drum machine itself or through...