thanks for the advice, but i don't even own an ociliscope...i do have a volt meter though. is a scope necessary? i don't know which pin is which either (i.e which is pin 8 and which is ground)...that reminds me do you happen to know a tech in or near chicago? or at least how to find one. the best i'...

sounds like it is set to receive midi on a channel you are not sending on.. Check the manual and set the midi receive to "omni" I consulted the MIDI section of the manually pretty thoroughly. I tried both differnt "omni" modes as well as the mono mode that makes the 6 voices six different midi chan...

I recently got a Sequential Cirquits Six-Track. I can't for the life of me sequence or control it at all via MIDI. I was able to control my TR-707 via the Six-Trak's MIDI Out, but I can't seem to get anything to work via MIDI In. Anybody have any experience with this? Ideally I would like to sequenc...

i replaced the batteries with fresh new ones and tried triggering the 101. it worked perfectly, even in write mode. i'm going to try and get the power supply asap. thanks everyone for the help.

Were you at any point able to trigger your 101 correctly while the 606 was battery powered? I'm thinking maybe the 606-triggers aren't quite as reliable when it's battery powered. You should definitely get a power supply and report back. Power supplies are cheap, techs... not so much, and you need ...

mmm, so it does this in play mode too? That doesnt sound right, might need to get it checked over by a tech. :? yeah i think i do need to get it serviced. anybody know someone reliable in the chicago area? Dunno if this'll help, but when I switch to batteries from mains power, my 606 doesn't trigge...

The 606 is not very good at triggering anything other than Roland gear anyway; I had one and anticipated triggering my OB-8 arpeggiator, but it didn't even recognize the pulse... Just for future reference, posts like this should go in the "Help" sub-forum. Ok, regarding your question - I too have u...

i have been using a 606 to trigger an sh-101... lately i've had this problem with the 606 triggering: instead of the ht/lt triggering the sequence on the 101 as per the ht/lt pattern on the 606, it skips triggers. seems like it's getting worse, like a 16-step tom pattern will trigger the 101 2 or 3 ...