Casio CZ1000 polarity question

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
User avatar
DX
Junior Member
Junior Member
Posts:239
Joined:Fri Nov 11, 2005 1:29 pm
Location:Spain. Europe.
Casio CZ1000 polarity question

Post by DX » Sat Oct 21, 2006 10:32 am

Hi.
Just received my CZ1000. After reading owner's manual from a cz101 and check all around the power supply conncector, I don't know what polarity it needs.

I googueled for a couple of minutes with no success.

Just only want to know if the connector's center is the Positive or Negative lead for selecting it right on my power supply. While I don't know, I don't power it up of course :)

Thanks folks!
Roland Promars, E-mu EMAX and some other machines...
Top
dougt
No Longer Registered

Post by dougt » Sat Oct 21, 2006 10:52 am

The center is Negative.
Top
User avatar
DX
Junior Member
Junior Member
Posts:239
Joined:Fri Nov 11, 2005 1:29 pm
Location:Spain. Europe.

Post by DX » Sat Oct 21, 2006 10:56 am

dougt wrote:The center is Negative.
Thank you dought.

I'm going to power it up :)
Roland Promars, E-mu EMAX and some other machines...
Top
Post Reply

Return to “HELP!”