JP8000 - reset to factory // Midi In does not work!

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
majras
Newbie
Newbie
Posts:13
Joined:Fri Dec 17, 2021 10:48 am
Gear:Korg DW8000
Korg Prologue
Roland JX-8P
Emu Emax
Band:DM
JP8000 - reset to factory // Midi In does not work!

Post by majras » Sat Aug 05, 2023 1:12 pm

Hi,

Probably I did the biggest mistake in my synth life :(
I bought some time ago Jp8000. Spent a few weeks enjoying great Jp sound. Yesterday I decided that I will check ROM version and do some updates if necessary. I checked ROM version, it was 1.05 (138 i belive). I Found that the newest version (279) is available, so I start the procedure of updating (below)

After point 3) Press REC,
all data has been erased and system was waiting for Midi file. So I connected my Roland UM-ONE MK2 interface, launched DAW and played Midi file - But nothing happened, Jp was still waiting for MIDI file. I checked all connection a few times, I'm 99% sure that Midi IN port in broken and I have never checked Midi IN port before ! :(
When I switch on the JP, the lights are on but no ROM loading as the ROM has been erased.

Please tell me that there still something that I can do to get back my JP ?

1) Connect the sequencer MIDI-OUT to the JP-8000 MIDI-IN.
2) Turn on the power of the JP-8000 while holding down the [LFO1 WAVEFORM],
[OSC1 WAVEFORM], [OSC2 SYNC] and [OSC2 WAVEFORM] buttons.
3) Press REC.
4) When 'Ready to update' appears on the screen, send the first file (_00001.mid)
from your sequencer.
5) When the file is completed, verify that the checksum is indicated as below.

Block1 ( chksum = 49F8 ) => filename : '_00001.mid'.
Block2 ( chksum = 12E3 ) => filename : '_00002.mid'.
Block3 ( chksum = A146 ) => filename : '_00003.mid'.
Block4 ( chksum = E6EB ) => filename : '_00004.mid'.
Block5 ( chksum = 5455 ) => filename : '_00005.mid'.
Block6 ( chksum = 672D ) => filename : '_00006.mid'.
Block7 ( chksum = C131 ) => filename : '_00007.mid'.
Block8 ( chksum = F294 ) => filename : '_00008.mid'.

If the value is different, press [EXIT] and repeat steps 4 and 5.

6) If the value is correct, press the [REC] button.
7) Load the files one at a time, in sequence _00002.mid to _00008.mid and repeat
steps 4-6.
8 ) One all the files have been loaded, 'Completed' will be indicated on the screen.
Turn off the power of the JP-8000.

Post Reply