Strange E-mu Emulator II output modification.

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
Ohm's Law
Newbie
Newbie
Posts: 44
Joined: Mon Nov 13, 2006 5:25 pm
Location: Quartz Hill CA

Strange E-mu Emulator II output modification.

Post by Ohm's Law » Fri Oct 08, 2010 2:19 am

Hi,

Had two E-II+HDs for a while.

One has a mystery switch on the disc drive and two extra 1/4" jacks on the back.

Finally opened the modified unit. Attached are some pics.

Ever heard or seen a mod like this? It's fairly in depth!

Trying to figure out what it is / does.

Thanks,

Tim.

Image
Image
Image
Image
Moog Prodigy, Moog MG-1, Moog Liberation, Roland Juno 60, Roland SH-101, Roland MKS-80 super Jupiter, Roland SH-3a, Roland JX-305, Roland Sh-32,
Korg MS-10, Nord Micro Modular, Casio CZ-101, Univox Maxi-Korg, Yamha CS-01.
Top
schmidtc
Active Member
Active Member
Posts: 591
Joined: Sun Dec 03, 2006 8:27 pm
Location: Virginia / Paris

Re: Strange E-mu Emulator II output modification.

Post by schmidtc » Sat Oct 09, 2010 8:41 am

Weird, the 2 chips shown are CMOS switches, it will only pass signal if a voltage on another pin goes high.
Top
Post Reply

Return to “HELP!”