So I am looking to get a UC33e to be a hardware programmer for My Miniak and some DSI gear as it looks to do the NRPN data they way I need it to , but I am unsure so I thought I would ask .
So for example One knob on the UC33e would need to be set to use ; MSB / LSB Data Course & Data Fine . Looking at the enigma editor I see all these as options , but as I don't yet have the hardware I am unsure if all these can be set to one knob or slider . They all are shown in the controls side bar , but I wanted to make sure they can be assigned to one controller and not need to be split up over several .
Many thanks to anyone in the know !
Any one own a UC33e out there ?
Forum rules
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
-
loungedumore
- Active Member
- Posts: 638
- Joined: Tue Jan 23, 2007 10:25 am
- Gear: iMac | iPad 2| iPad Air
Beatstep Pro | Mpx8
Volca bass, Keys ,beats
Monotribe | MS20 | SQ1
Minibrute | Midi4+
Graphite 49 | EIE - Band: Death By Media
- Location: Indiana
- Contact:
Any one own a UC33e out there ?
Some wish to leave their mark ... I want to leave a scar .
http://soundcloud.com/death-by-media
http://soundcloud.com/death-by-media