eml 200 reverb
Forum rules
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
-
construct09
- Supporting Member!
- Posts: 50
- Joined: Thu Oct 08, 2009 1:07 am
- Real name: b
- Location: gtownaustralia
eml 200 reverb
when i increase the depth of reverb on the 200 i recently acquired the overall volume decreases dramatically. it,s been suggested the polarity is reversed at the reverb output and i should just reverse the 2 wires. The black wire which is connected to the ring of the out goes back to the psu board and i,m hesitant to touch it, my knowledge of electronics is poor. can any 200 owners offer any advice short of sending it interstate to a tech? it,s a single panel silverface. thanks