Juno-60 shuts off upon pushing "Save" for patch storage
Forum rules
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
-
Elandroth
- Newbie
- Posts: 91
- Joined: Sat Mar 27, 2010 11:35 am
- Gear: Nord Lead 2X, DSI MEK PE, Roland D-50/Juno-60/TR-707, Ensoniq ESQ-1, Casio CZ-5000, Elektron MD UW+
- Location: Buffalo, NY
Juno-60 shuts off upon pushing "Save" for patch storage
Any ideas? Whenever I press the "Save" button, it just shuts off. I have to flip it off and back on, and it's back to normal - without saving anything. I previously never really wanted to store any patches in the Juno, as I'm not a performer and I use the Juno as sort of a super friendly "cook up a sound quick" board for jamming or just doing a cover or something. It's always so easy to find what I'm trying to dial in, I've never even cared about storing the patch, but now I have reason to and I'm getting this behavior. I tried searching but couldn't find this topic.
Re: Juno-60 shuts off upon pushing "Save" for patch storage
It sounds to me like you may have a Juno 6 inside of a Juno 60 shell where the save tact switch has been routed in series with the mains. Cool.
I'm no help, a true professional is needed here.
I'm no help, a true professional is needed here.
-
rhino
- Supporting Member!
- Posts: 2611
- Joined: Sat Aug 02, 2008 5:00 pm
- Real name: bill
- Gear: keepers:
Kurzweil K2500x
Ensoniq TS-12
Yamaha SY-99
Alesis QS-8
Roland JD-800
Roland JX-10
Akai AX-80
Ensoniq SQ-80
Korg DSS-1
Moog Mini
Fizmo - Location: kentucky hills
Re: Juno-60 shuts off upon pushing "Save" for patch storage
No expert here.
1) Do the BANK-3 and Patch-3 buttons seem to work? If so that rules out the strobe line.
2) Try pressing SAVE with the ARP MODE switch set to UP/DOWN. Any change? This isolates that scan line from the arp. circuits.
3) Maybe some strange defect in the SAVE button : a broken piece touching ground?
EDIT: cracked trace on the board being opened from the motion of pressing the button?
1) Do the BANK-3 and Patch-3 buttons seem to work? If so that rules out the strobe line.
2) Try pressing SAVE with the ARP MODE switch set to UP/DOWN. Any change? This isolates that scan line from the arp. circuits.
3) Maybe some strange defect in the SAVE button : a broken piece touching ground?
EDIT: cracked trace on the board being opened from the motion of pressing the button?
When the wise man points to the stars, the fool looks at the finger.
- Confucius
- Confucius