workin on a fizmo track
Forum rules
READ: VSE Board-Wide Rules and Guidelines
READ: VSE Board-Wide Rules and Guidelines
- DLovas
- Supporting Member!

- Posts: 495
- Joined: Fri Dec 24, 2010 8:48 pm
- Real name: David
- Gear: Roland JP-8000
Roland JV-1080
Roland D-550
Roland S-760 (3x)
Waldorf Pulse+
u-he Zebra2 - Location: Connecticut
workin on a fizmo track
what u think so far - the angelic lead/pad thing is the Fizmo - I plan to implement it a lot more in future developments.
** Updated
Added some bass type sounds - altered arrangement - messed more with drums. Still haven't gotten to an Open Hi-Hat so don't think i've forgotten. Swooshes and all that to come later.
I plan to implement the AN1x, and the JP8000 into this track as well - make it a Trance "Tour de Force"
____________________________________________________________________________________________________
This other one really shows off this one patch I made on the fiz. I find it quite magical.
** Updated
Added some bass type sounds - altered arrangement - messed more with drums. Still haven't gotten to an Open Hi-Hat so don't think i've forgotten. Swooshes and all that to come later.
I plan to implement the AN1x, and the JP8000 into this track as well - make it a Trance "Tour de Force"
____________________________________________________________________________________________________
This other one really shows off this one patch I made on the fiz. I find it quite magical.
Last edited by DLovas on Thu Jan 26, 2012 7:15 am, edited 5 times in total.
- dustinh
- Active Member

- Posts: 283
- Joined: Tue Jan 04, 2011 7:57 pm
- Gear: juno-1, ensoniq sq-80, dsi mopho, microbrute, gretsch guitars, motu 2408, monotron, and caffeine
- Location: Seattle, WA
Re: workin on a fizmo track
I really dig! Very trancey. It's a beautiful pad. I hope you're not going to shelf this idea, keep working on it.
- DLovas
- Supporting Member!

- Posts: 495
- Joined: Fri Dec 24, 2010 8:48 pm
- Real name: David
- Gear: Roland JP-8000
Roland JV-1080
Roland D-550
Roland S-760 (3x)
Waldorf Pulse+
u-he Zebra2 - Location: Connecticut
Re: workin on a fizmo track
Thanks - ill definently stick with itdustinh wrote:I really dig! Very trancey. It's a beautiful pad. I hope you're not going to shelf this idea, keep working on it.
- DLovas
- Supporting Member!

- Posts: 495
- Joined: Fri Dec 24, 2010 8:48 pm
- Real name: David
- Gear: Roland JP-8000
Roland JV-1080
Roland D-550
Roland S-760 (3x)
Waldorf Pulse+
u-he Zebra2 - Location: Connecticut
Re: workin on a fizmo track
I've updated the track - edited original post scroll up
- dustinh
- Active Member

- Posts: 283
- Joined: Tue Jan 04, 2011 7:57 pm
- Gear: juno-1, ensoniq sq-80, dsi mopho, microbrute, gretsch guitars, motu 2408, monotron, and caffeine
- Location: Seattle, WA
Re: workin on a fizmo track
Coming along nicely. This would sound great on a dance floor for sure. It needs a nice chord progression next I think.
- DLovas
- Supporting Member!

- Posts: 495
- Joined: Fri Dec 24, 2010 8:48 pm
- Real name: David
- Gear: Roland JP-8000
Roland JV-1080
Roland D-550
Roland S-760 (3x)
Waldorf Pulse+
u-he Zebra2 - Location: Connecticut
Re: workin on a fizmo track
thanks! yeah - I've been thinking this weekend I'll program some nice pluck sounds on my AN1x to give it that authentic TRANCY feel!dustinh wrote:Coming along nicely. This would sound great on a dance floor for sure. It needs a nice chord progression next I think.
Also might implement the JP8000 into it - although lately my JP programming skills have proven quite lackluster.
Thanks again!
(Also I plan to rid of, or revise the "Buzz" bass I made with the Fizmo - somethings off about it, and I didn't pick up on it until after I rendered out, and uploaded the track...)
-David
- DLovas
- Supporting Member!

- Posts: 495
- Joined: Fri Dec 24, 2010 8:48 pm
- Real name: David
- Gear: Roland JP-8000
Roland JV-1080
Roland D-550
Roland S-760 (3x)
Waldorf Pulse+
u-he Zebra2 - Location: Connecticut
Re: workin on a fizmo track
I know I should probably finish all of my works in progress - but I always feel the need write down my ideas.... then I get carried away... tell me what you think of this new track I've started today - also used the Fizmo. I'll put it at the top... of course its not done at all - just an idea.
- tekkentool
- Synth Explorer

- Posts: 3218
- Joined: Fri Jun 26, 2009 10:51 am
- Real name: Steve
- Gear: Lasers (ส้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้ ωส้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้)
- Band: none currently
- Location: Sydney, australia.(I moved)
Re: workin on a fizmo track
No plucks man! get taken away and turn it into some goa trance.
- DLovas
- Supporting Member!

- Posts: 495
- Joined: Fri Dec 24, 2010 8:48 pm
- Real name: David
- Gear: Roland JP-8000
Roland JV-1080
Roland D-550
Roland S-760 (3x)
Waldorf Pulse+
u-he Zebra2 - Location: Connecticut
Re: workin on a fizmo track
Hopefully soontekkentool wrote:No plucks man! get taken away and turn it into some goa trance.
- samuraipizzacat29
- Supporting Member!

- Posts: 819
- Joined: Mon Jan 31, 2011 6:40 pm
- Real name: Nate
Re: workin on a fizmo track
what is it at :32 that sounds like an angry fart in the background? I LIKE IT!!!!
edit: in the first track that is.
keep up the good work, I really like. I know your goal is toward something trancey, but have you experimented with broken beats and odd timings? just wondering.
edit: in the first track that is.
keep up the good work, I really like. I know your goal is toward something trancey, but have you experimented with broken beats and odd timings? just wondering.
-
Tiger Jackson
- Supporting Member!

- Posts: 173
- Joined: Mon Nov 05, 2012 10:14 pm
- Gear: Ensoniq ESQ-1, Microkorg, Yamaha DX100, Fizmo
Re: workin on a fizmo track
Hope you don't mind the bump.. but really nice track.. i love the fizmo and what it does
- crystalmsc
- Synth Explorer

- Posts: 2862
- Joined: Thu Jul 13, 2006 7:15 am
- Gear: uWaveXT,uQ,Pulse+;Ion;MiniBrt,Karma,Mntrb,Volcas,01R;Venom,NordModular,L2X;Evolver;JP8080,MKS70,JD990,D50,MC909,MC80ex,Microcon2;TG77,RS7k,AN200,AN1x
- Band: Crystaline
- Location: Synth Garden
- Contact:
Re: workin on a fizmo track
Great track and Fizmo demo. I dig it!
Kaossilatron - Voicillator
http://crystaline.bandcamp.com
Station: Ableton Live 10 Suite, Obscurium, Push 2, Ultranova, MS-20m, Wavedrums
http://crystaline.bandcamp.com
Station: Ableton Live 10 Suite, Obscurium, Push 2, Ultranova, MS-20m, Wavedrums
