Kurzweil K2600 and balanced outputs

Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the

Topic Icon to let others know your topic has been solved.

vcs3: Supporting Member!; Posts: 342; Joined: Sat Sep 17, 2005 9:22 am; Gear: BitOne,DX7II, M-1000, ESQm, Procussion, NanoSynth, VL1, P2500, K5000R, FS1r, JX-3P, Ju-60,HR-16, CZ1000, RX-5,K2600S, Nord G1r, G2, XL-7, Shuthri-1; Location: Lusitania

Kurzweil K2600 and balanced outputs

Quote

Post by vcs3 » Wed Dec 23, 2009 11:23 pm

Hi,
I just bought a K2600s

but I have a problem to start:
when a I plug 2 mono jack in the output to the input of my Xenix 1002 it doesn't
sound in the Left channel, after reading the manual I found... nothing, did a soft reset,
enter in test mode and did all the tests when I notice that if I didn't enter all the Left plug into the socket
I get sound!
What's the problem with my jacks and how can I make a cable that works?

Thank you in advance and Merry Christmas.