Sequencing Wavestation with RM1x

zielvis · Post by **zielvis** » Fri Nov 03, 2006 3:33 pm

Hello,

I have just bought Korg Wavestation A/D and I'm planning to use it with Yamaha RM1x. My question is: After connecting the machines together is it possible to have some of the MIDI channels used for internal Yamaha tone generator and some of them for different Korg patches? My aim is to use some of the sounds from RM1x (and have Wavestation silent) and some from Wavestation (and have RM1x silent).

Any comment or advise will be highly appreciated. Thanks,

MZ

Danchenka · Post by **Danchenka** » Fri Nov 03, 2006 4:35 pm

Yes, press the "setup" button on the RM1X three times to get to the "out channel" menu. Here you can set which channels go to the wavestation and which go to the RM1X's internal sound engine. For each RM1X track, you can choose "to TG" or "Midi out" and which midi channel you want. It's a little hard to explain, but if you just go press "setup" three times on the RM1X, you'll see what I'm talking about. It's pretty easy.

zielvis · Post by **zielvis** » Fri Nov 03, 2006 9:40 pm

Thank You very much, Danchenka. You helped a working man not to waste time on looking for the solution but to start playing right away