ARP 2600 attack and release

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
softitems
Newbie
Newbie
Posts:3
Joined:Tue Sep 26, 2006 6:33 pm
ARP 2600 attack and release

Post by softitems » Sun Nov 05, 2006 2:12 am

my roomate has an arp 2600. the filter for the attack and release never closes. you can control it manually but otherwise it makes it almost useless. im sure its just capacitors but if i get the schematics i wouldnt even know where to look for anything. you guys are usually pretty helpful with the information you give out so ny advice would be great.
Top
User avatar
hfinn
Expert Member
Expert Member
Posts:1197
Joined:Fri Dec 10, 2004 3:21 pm
Gear:http://soundcloud.com/heath-finnie
Location:Boston
Contact:
Contact hfinn

Post by hfinn » Sun Nov 05, 2006 3:19 am

Are you sure it's just not a slider in a bad position? There are lots of ways you could have it set so it doesn't work quite right (drone, etc)...
Top
User avatar
REwire
Junior Member
Junior Member
Posts:164
Joined:Sat Feb 19, 2005 1:24 am
Location:Los Angeles, CA USA
Contact:
Contact REwire

Post by REwire » Mon Nov 06, 2006 5:36 am

The Filter section has only direct sliders for the ADSR Envelope and VCO2. The AR and ADSR Envs are hardwired to the VCA. Therefore. the AR would have to be patched to the filter to do what you are saying. Are you saying the ADSR is not working on the filter or is th AR not working with the VCA? Try patching around to test these sections.
Buchla, Serge & Eurorack Modular; EML101; Minimoog; Synthacon; MS20; Nord2; NordG1; PolyEvoRack; MKS80; MKS50; TB303; Electribe EMX1; JV1080
http://www.REwireMusic.com
Top
Post Reply

Return to “HELP!”