Prophet 5 cv filter jack-Solved

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.
Post Reply
EdGs
Junior Member
Junior Member
Posts:102
Joined:Sun Aug 02, 2009 8:01 am
Gear:Prophet 5 and Emulator 1, both are works in progress
Epiphone LesPaul Ace Frehley
Hondo Formula One Vee
Fender Gemini IV
Location:Florida
Prophet 5 cv filter jack-Solved

Post by EdGs » Tue Feb 21, 2012 2:46 am

Just got the answer-Yes it is. I feel very stupid for missing it in the first place.

I've finally gotten where I can resume work on my P5 rev. 3.3 again after many, many months. When I worked on her last, I changed out the 1/4" jacks as the originals were very crappy. I was just about to the point of finishing this when I had to pack her away.

Upon trying to pick up where I left off, I was looking at the original jacks and noticed that on the cv filter jack, the ground is also connected to the nc contact in the jack. Apparently, I failed to make this connection on the new one. When I doublechecked the schematic, it didn't show up as being connected that way.

Can anyone with a P5 take a look at theirs and verify this? I just want to be sure because this machine has come a long way since I got it and I don't want to screw up something now.

Thanks
Top
Post Reply

Return to “HELP!”