Just found this website in a mad search for info...
I recently purchased the SR JV 80 -98 Experience II board for my JV 880..
For the life of me I cannot access the Patches. I have read my manual and tried the "Load Patch Single and Load Patch Group" but... I get a "Parameter Not Exist" message.
ANY help would be appreciated.
Thanks
Roland Expansion Card Patches & JV 880
Forum rules
READ: VSE Board-Wide Rules and Guidelines
READ: VSE Board-Wide Rules and Guidelines
-
max badwan
- Active Member
- Posts:298
- Joined:Tue Aug 06, 2013 1:34 am
- Real name:Max
- Gear:T1, XV 5080, ES1, Zaquencer
- Location:Sydney, Australia
Re: Roland Expansion Card Patches & JV 880
Is the board seated correctly? Open her up and check to make sure, as it's the only thing I can think of that might help - although the OS might not recognise that high a number (i.e. SR-JV80 ##) board - when the 8/80 was released there was only a couple avalable, so the OS might not be able to see that high a number board. Hope that helps.
-
Mr_Mojo_Risin
- Newbie
- Posts:26
- Joined:Mon Oct 27, 2014 11:10 pm
- Gear:MKS-70, JX-10, MKS-50, U-20, S-50, S-550, W-30, JV-880, GR-1, U-110, D-110, FB-01, Kawai K1r, PGH 10+1 x 2, ME20A, ME30P, LM-3204
- Band:Factorial
- Contact:
Re: Roland Expansion Card Patches & JV 880
The JV-880 and other models are unable to use any of the Patches on this board. You can only use the Waveforms. The SR-JV80-98 Experience II board is kind of a kludge. It does not work like the other boards in the SR-JV-80 series.
Taken from the SR-JV80-98 Experience II user manual;
"This 'tryout' expansion board features unique specifications which make it incompatible with the JD-990. The JV-80/880/90/1000 allows you to use only waveforms."
Taken from the SR-JV80-98 Experience II user manual;
"This 'tryout' expansion board features unique specifications which make it incompatible with the JD-990. The JV-80/880/90/1000 allows you to use only waveforms."