Every time I trigger a note on the juno, or trigger it from the midi device, I hear a click. When I unplug the midi out this doesn't happen. Also sys ex seems to be working funny. I can't seem to transmit any data to the Juno, as far a parameters and what not.
Any ideas?
Juno 106 Midi Click
Forum rules
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
READ: VSE Board-Wide Rules and Guidelines
If your Help request has been solved, please edit your first post in order to select the
Topic Icon to let others know your topic has been solved.
-
meatballfulton
- Moderator
- Posts:6312
- Joined:Wed Apr 13, 2005 9:29 pm
- Gear:Logic Pro X
Ableton Live
Nektar Panorama P6
Launchpad X
MOTU M2 interface
Re: Juno 106 Midi Click
As far as the click it would help if you could post an audio example.
As far as sysex, proper transfer of sysex on early MIDI synths can be painful. The speed of transmission, whether too slow or too fast, can be all that's required to cause problems.
I assume you have set the MIDI switch on the rear panel to "III" (3), in the other two modes sysex is neither sent or received. Is the Juno sending sysex out when you tweak parameters?
As far as sysex, proper transfer of sysex on early MIDI synths can be painful. The speed of transmission, whether too slow or too fast, can be all that's required to cause problems.
I assume you have set the MIDI switch on the rear panel to "III" (3), in the other two modes sysex is neither sent or received. Is the Juno sending sysex out when you tweak parameters?
I listened to Hatfield and the North at Rainbow. They were very wonderful and they made my heart a prisoner.
-
madtheory
- Supporting Member!
- Posts:5646
- Joined:Mon May 01, 2006 12:45 pm
- Real name:Tomas Mulcahy
- Gear:Wurlitzer Opus 1536, Model F, Morovdis Arpeggiator, Maplin My First EQ, Jeff Wayne Thunderchild rack, Thermostat, Buck Owens' Moog.
- Location:Cork, Ireland
- Contact:
Re: Juno 106 Midi Click
meatballfuton is spot on about the switch setting. RTFM 
The clicks are caused by a non-MIDI DIN cable. You're hearing a ground loop because all 5 wires are connected including a screen which is probably shorted to one of the pins for audio purposes. A proper MIDI cable has only 3 out of the 5 connected. Get a better, branded MIDI cable. Thomann should have them.
The clicks are caused by a non-MIDI DIN cable. You're hearing a ground loop because all 5 wires are connected including a screen which is probably shorted to one of the pins for audio purposes. A proper MIDI cable has only 3 out of the 5 connected. Get a better, branded MIDI cable. Thomann should have them.
Re: Juno 106 Midi Click
I'm not sure whats happening but its stopped. The synth doesn't seem to be sending out sysex or receiving as, I can't tweak parameters in my daw using a Juno 106 sysex plugin, which is the source of my current frustration.